Sony Logo

Sony Recent Questions, Troubleshooting Help & Support

Do you work here? Claim your company

  • 15K Products
  • 479K Answers

Hello Graham, for what you say you have one or more control buttons of your Sony SA-PM65MD defective, this does not work properly the rest of the buttons
The correct repair would be to replace all the buttons
If you can't do it, consult a specialized technical service
I hope you can solve the problem
Greetings Franco Dosil

Hola Graham, por lo que comentas tienes uno o mas botones de control de tu Sony SA-PM65MD defectuosos, esto hace que no funcionen correctamente el resto de los botones
La reparaci?n correcta, seria reemplazar la totalidad de los botones
Si no puedes hacerlo, consulta con un servicio t?cnico especializado
Espero puedas resolver el Problema
Saludos Franco Dosil

Sony Audio... | Answered 8 hours ago

Hi Sherry, you can test your remote control to see if all the keys work correctly
Take your cell phone, put in camera mode and point the emitting LED of the remote control towards the camera,
press the keys, one at a time and see if the emitting LED is illuminated, if so, try the volume up key, if the light does not turn on, you could carefully disassemble the remote control and clean the contacts and the keyboard internally rubber,
Do not use alcohol to clean
the rubber keyboard, you can clean it with warm water and detergent then let it dry very well,
the contact plate, you can use a cloth with some liquid to clean the glass,
the idea is to remove the rubber residue on the contacts
then arm again and test, but you have results consult a specialized technical service
I hope you find the suggestion useful
Greetings Franco Dosil

Hola Sherry, puedes probar tu control remoto para saber si todas la teclas funcionan correctamente
Toma tu celular, pon en modo camara y apunta el Led emisor del control remoto hacia la camara,
presiona las teclas, una por vez y fijate si se ilumina el Led emisor, si es asi, prueba la tecla de subir el volumen, si no se prende la luz, podrias desarmar con cuidado el control remoto y limpiar internamente los contacto y el teclado de goma,
No Uses Alcohol para limpiar
el teclado de goma, lo puedes limpiar con agua tibia y detergente luego dejalo secar muy bien,
la placa de los contactos, puedes usar un pa?o con un poco de liquido para limpiar los vidrios,
la idea es sacar el residuo de goma que hay sobre los contactos
luego arma nuevamente y prueba, sino tienes resultados consulta a un servicio tecnico especializado
Espero te resulte util la sugerencia
Saludos Franco Dosil

Sony BRAVIA... | Answered 18 hours ago

Hi Bruce, if you want to directly control your Sony KDL-37L5000 TV with your Sony RM-YD028 remote control, it should work without any problems, at most you will have to reconfigure it with the Sony TV code
I hope you can resolve your concern
Greetings Franco Dosil

Sony Televison &... | Answered 18 hours ago

You can download a playstation format file on this site

Sony PlayStation... | Answered 20 hours ago

ask sony yet? and they charge money for there service manual
and substitutions would be the most complex question possible.
only sony knows this.

Sony 21"... | Answered Yesterday

STR-S6307 is not compatible with STR-S6707,
ON STR-S6707 YOU CAN USE STR-S6708 or STR-S6709

strs6707 schema small-up1tpxdjtbyzz3nucycghl1s-1-2.gif

Sony Televison &... | Answered Yesterday

try going into set up and reset to factory

Sony Televison &... | Answered Yesterday

go into setup and change region

Sony Televison &... | Answered Yesterday

Remote control information is included in the manual for the TV.

Sony Televison &... | Answered Yesterday

sorry we do not have it or know where r to find it

Sony Unit 13 Ps... | Answered 2 days ago

this error is
"Reset position detect error when stepper iris is initialized"

Turn on the power and set to T (telephoto) end by rotating the
ZOOM manual ring. While observing the iris blades in the
lens, turn on the power again and check the iris blades in the
lens work properly. Inspect the iris drive motor of lens drive
block (Pin qh to ql of CN6602 on the VC-582 board), when
the iris does not operate. Inspect the iris reset sensor of lens
drive block (Pin qd to qg of CN6602 on the VC-582 board),
when the iris operate.
if you need more help you can download the factory service manual from the below link:
Good Luck

Sony HXR-NX5E... | Answered 3 days ago

Hi Andrew, what kind of speakers do you use?
If they are passive, they will not work, because your icf-sw55
It has headphone output and recording output
You must use powered speakers or connect it to an audio amplifier
Discuss what speakers you are using
Regards Franco Dosil

Hola Andrew, que tipo de altavoces utilizas?
Si son pasivos, no funcionaran, porque tu icf-sw55
tiene salida de auriculares y salida de grabaci?n
Debes usar parlantes potenciados o conectarlo a un amplificador de audio
Comenta que parlantes estas usando
Saludos Franco Dosil

Sony Audio... | Answered 3 days ago

A usb cable and the software

Sony Handycam... | Answered 3 days ago

this error code is related with the HDD, please connect with your computer and save all the files in a folder then format the camera using the computer, then ones more format the HDD with your camera. try it, with record.

Sony Video... | Answered 3 days ago

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Sony Experts

The Knight
The Knight

Level 3 Expert

76115 Answers

Steve Allison
Steve Allison

Level 3 Expert

5569 Answers


Level 3 Expert

85161 Answers

Are you a Sony Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides