Sunpentown Electrical Supplies - Recent Questions, Troubleshooting & Support


hi
i say have look around the foot plate if you can detect loose cables to any joint electric blocks and ensure the cable are not cracked shaved

Sunpentown... | Answered on Jan 13, 2018


Here is a link to the manual. I hope it helps, because it says nothing about putting on handle. Maybe pics will help.
http://site.sunpentown.com/wc-30U_manual.pdf

Sunpentown... | Answered on Jan 28, 2015


I have parts for 2800 and 3300 Eastern Steel Generators including a Muffler you
can email me if intrested. 12_29_2011_5_46_05_pm.jpg

Sunpentown 2,800... | Answered on Sep 14, 2014


Hello,
You should refer to the user manual to help you troubleshoot your equipment located Here: http://www.manualslib.com/manual/574948/Sunpentown-Wc-30u.html
I hope this helps!
Good Luck!
Rich Lilja

Sunpentown... | Answered on Jul 22, 2014


If the unit is starting with no wires to/from the switch, then likely the switch is just supposed to ground the spark in order to stop the engine.

Sunpentown 2,800... | Answered on Jan 22, 2014


If the studs are there to hold it all in place then just buy the correct ( metric probably) nuts for it.

Sunpentown 2,800... | Answered on Dec 15, 2013


There are many generators made in china that use a generic Honda look-a-like motor. If your gen was made in china, good chance that there is an aftermarket starter assembly. Remove the starter and take it to your local small engine repair shop and ask them to try to match it up with another brand. If the starter is missing, take the generator to shop and ask them to look at mounting and starter cup. Good chance there is something out there that will work. If you have the starter assembly, small engine shop may be able to repair. If the starter rewind riveted to fan cover, take the whole fan comer to shop. Good luck

Sunpentown 2,800... | Answered on Sep 12, 2011


Hi,
Check for a crankcase with oil in it on the motor...if you have oil in the motor already then you do not need to mix it in the gas...
I am very sure that you will find this motor does not need the gas mixed...
Run straight gas... usually it is good to run Prem in small motors..

heatman101

Sunpentown 2,800... | Answered on May 21, 2011


Try this site: www.shopping.com/sunpentown-tg-2800-generator-parts/products

Sunpentown 2,800... | Answered on Apr 14, 2011


the little spring should go through same holes as the linkage it's purpose is to take the slack out of the rod to keep the engine running smooth a broken spring will cause it too run erratically

Sunpentown 2,800... | Answered on Jan 16, 2011

Not finding what you are looking for?
Sunpentown Logo

29 questions posted

Ask a Question

Usually answered in minutes!

Top Sunpentown Electrical Supplies Experts

John Trevino

Level 3 Expert

1407 Answers

rlev_7

Level 1 Expert

46 Answers

Richard Lilja
Richard Lilja

Level 3 Expert

400 Answers

Are you a Sunpentown Electrical Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...