Ultra Logo

Ultra Recent Questions, Troubleshooting Help & Support

Do you work here? Claim your company

  • 110 Products
  • 479 Answers
  • 47K Views

Try Googling (SimplyVibe)(V3-5CPS)(manual) without parens.

Ultra Televison... | Answered on Jun 18, 2017


Do you mean you need to insert the batteries ? If so, I would expect something as basic as this to be comprehensively covered in the manual.

Ultra... | Answered on Jun 17, 2017


I would check the grounding of the Starter and make sure the Hot wire to the starter is in good shape. Sounds like you are not getting enough Amperage to the starter

Ultra... | Answered on May 13, 2017


You need to install software to make the added drive function.

Ultra Computers... | Answered on May 04, 2017


Check whether the audio is muted by accidental press at remote control button. Enter its sound menu, and check it. If muted, as you know there will be no audio output. If not muted, Check the speaker/s. If found OK; check and replace the damaged component/s at its audio output section circuit board. If needy, replace this board as card basis. If you wish to get some details; check the site linked here. Pull up older posts. Search the site by type in the "brand name" to your device; in the "Search box at the top right of the display window of the Homepage" to get gathered related posts. http://electronicshelponline.blogspot.com/

Ultra Televison... | Answered on Apr 29, 2017


The main power supply regulator section circuit fault. Either it will be a separate board, or the part of main board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Pull up older posts.
http://electronicshelponline.blogspot.com/
It will be best to replace the power supply regulator board as card basis rather than making "Surgery" to it; which usually will make loss for both money and time. Even though you can make it right, it will cost around an amount equal to the cost of a new board; including the cost of (spare parts + service charge) More to say, most of the spare parts to it will be difficult to get from open electronic spare part market. This is true to most of the flat panel TV power supply boards; irrespective of its brand and screen size.
Search the site by type in the "brand name" to your device; in the "Search box at the top right of the display window of the Homepage" to get gathered related posts. ..

Ultra Televison... | Answered on Apr 18, 2017


Indoor aerials are exclusively for areas with a strong signal and the way digital tv works a good signal is essential.

I expect the signal where the aerial is sited has a poor signal strength and a high gain outdoor aerial will be needed. I suggest you have a look around and check what the neighbours are doing but bear in mind the signal strength in built up and fringe areas can be the radio equivalent of micro climates where moving a few yards in any direction and you could either be freezing or growing pineapples.

If you can take your tv to a good aerial and do a retune and store the found channels you might be lucky and discover your indoor aerial might receive a few channels well enough for viewing.

Ultra Televison... | Answered on Mar 19, 2017


I think I would take it back to the vendor, ask for my money back, and buy a different brand of iron. Obviously, the Seamstress has issues!

Ultra Televison... | Answered on Mar 16, 2017

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Ultra Experts

Tom Chichester

Level 3 Expert

54195 Answers

ray gallant
ray gallant

Level 3 Expert

64309 Answers

Terry
Terry

Level 3 Expert

10347 Answers

Are you an Ultra Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...