Ultra Logo

Ultra Recent Questions, Troubleshooting Help & Support

Do you work here? Claim your company

  • 110 Products
  • 478 Answers
  • 47K Views

hi Cindy, normally that is associated with low batteries...

Regards
Rob

www.gewizrepairs.co.uk

Ultra Health &... | Answered on Feb 22, 2017


There are two methods to reset TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/
Service mode entry, adjust and exit procedure to many popular brand TVs are given. Never forget to exit the service mode, after all adjustments have been done.

Ultra Televison... | Answered on Feb 19, 2017


Hi, Aaron I would love to help you but due to the magnitude of yesterday's solar flare the batteries in my crystal ball are dead and my mental telepathy headset circuitry was melted. I need the year, make, and model of your motorcycle please click on the word "COMMENT" below and provide this information in the box that will open and then click on the green comment box in the bottom right-hand corner after it posts I will receive an "ALERT" icon that will allow me to respond to your information. Good luck and have a nice day.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Ultra... | Answered on Feb 02, 2017


Hi, James and the usual suspects are:
1. Clutch dragging slightly.
2. Primary chaincase overfilled with lubricant.
3. Corners wore off shifter clutch dogs.
4. Shifter return spring bent or broken.
5. Bent shifter rod.
6. Loose shift lever on shifter shaft.
7. Shifter forks sprung.
8. Shifter pawl needs adjusting.
9. Heel/toe shifter coming in contact with the floorboard.
10. Transmission oil too heavy.
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below and for more specific information or questions at no charge please feel free to contact me at xlch@mail.com. Good luck and have a nice day.
Problems shifting into neutral and sometimes down shifting Harley
Harley Davidson Touring Workshop Service Repair Manual 2013
http://partsfinder.onlinemicrofiche.com/ronnies/showmodel.asp?make=hdmc
http://www.harley-davidson.com/content/h-d/en_US/home/owners/maintain-your-bike/owners-manual.html
Instant Tech Relief A must have !!! Absolutely "FREE"

Ultra... | Answered on Jan 15, 2017


Those blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices.
http://electro-medical.blogspot.com/
If blinks continue without any pause, the main board is faulty.
Search the site by type in the "brand name" to your device, in the "Search box at the top right of the display window of the Homepage" to get gathered related posts.
Counting of number of blinks to Philips TVs is entirely different to that of other brand TVs. It is not a direct count procedure. The site have details about how to count the number of LED blinks [Fault Codes] to Philips brand TVs are given; along with details of the faulty circuit location

Ultra Televison... | Answered on Dec 17, 2016


what kind of codes are you looking for? remote codes? if so what kind of remote do you have?

Ultra Cell... | Answered on Dec 06, 2016


My Passport you mean your portable hard disc or something else ?

Ultra Computers... | Answered on Dec 02, 2016


Take it back it is likely defective if you know for sure you have a good TV signal. Do other TV's you own have this snowy appearance (white dots)

Ultra Televison... | Answered on Dec 02, 2016


have the voltage regulator tested or replaced
bulbs blowing are an indication of over voltage and the ECM failure is also over voltage
maximum voltage allowed is 14.8 volts dc and any thing over that is deadly to 12 volt equipment
take it to an accredited motor bike electrician and have the system checked

Ultra... | Answered on Nov 27, 2016


turn on bluetooth on lg441g in settings
Select find devices then pair phone to tracking band
there may be some way of turning pairing on the tracking band or it might do it automatically .

Ultra Cell... | Answered on Nov 23, 2016

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Ultra Experts

Tom Chichester

Level 3 Expert

54185 Answers

ray gallant
ray gallant

Level 3 Expert

64241 Answers

Terry
Terry

Level 3 Expert

10314 Answers

Are you an Ultra Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...