Uniden Logo

Uniden Recent Questions, Troubleshooting Help & Support

Do you work here? Claim your company

  • 2K Products
  • 77K Answers
  • 2M Views

If you get clear audio when close to the receiver, it would appear to be a problem in either the antenna or the receiver. Try a different antenna or relocate the antenna. If you adjusted the VSWR low it doesn't mean the power is radiating correctly. Verticals should be on roof, with roof as ground plane. Mounting on mirrors is ok, but doesn't work as well. Also, if you have sheet metal near the antenna, it acts as a ground reflector and can distort or block the waveform. You might also try it with a different receiver, in case yours has a faulty pre-amp stage. It could also be a power amplifier problem in the transmitter, where it shows 5 watts but isn't putting out that amount. You can check it with an RF watt meter.

Uniden Radio... | Answered on Jul 01, 2019


Usually you can press block calls again it will give you your list of numbers and you can usually unblock from there. If nothing helps call Uniden customer service and they will help you.

Uniden Lands... | Answered on Jul 01, 2019


If you need to change the greeting then you should use custom greeting to suit your needs. Go to Menu and then settings for answering system go to greetings and it should give you instruction.

Uniden Lands... | Answered on Jul 01, 2019


Trying to wire a dm-452 4 pin mic to a 5 pin uniden ... - Fixya

www.fixya.com/.../t22723929-trying_wire_dm_452_4_pin_mic_5_pin
Jan 6, 2014 - trying to wire a dm-452 4 pin mic to a 5 pin uniden washington -Uniden Bearcat Pro PC68XL ... SOURCE: trying wire a superstar dm-452.

How to wire a superstar DM-452 to a five pin uniden and ...

www.fixya.com/.../t26060852-wire_superstar_dm_452_five_pin_uniden
36 mins ago - how to wire a superstar DM-452 to a five pin uniden and washington - Uniden CB Radios question.

Wire superstar dm 452 mic - Answer

www.dqrkc.com/search/...uniden...pro.../wire_superstar_dm_452_mic
... to a 5 pin how to wire a dm-452 superstar 4 pin mic to a 5 pin uniden washingtonit's not possible to wire 4 wire mics to the uniden 5 wire radios without ...

Uniden Bearcat Pro PC68XL 40-Channels Base CB Radio ...


Uniden Radio... | Answered on Jun 29, 2019


Change the screen. That fix the problem.

Uniden Cell... | Answered on Jun 27, 2019


what do you mean by "announce"?
if it is the red flashing light say so as there is a fix for that problem

Uniden Lands... | Answered on Jun 21, 2019


Uniden Pc76xl Manual FREE Download - Ebookread..click on this if t don't work just copy and paste and put it into google.
hope this helps you out.let me no how you get on.
i was on the cb for over 30years myself so good good luck 10.4 and out.

Uniden Radio... | Answered on Jun 19, 2019


I don't think you can transfer to external. You can make a 3 way call, but then you would have to stay on the line to keep that line open.

Uniden Lands... | Answered on Jun 19, 2019


Unfortunately, you can't transfer from the old to the new. There is no data transfer port (usb) and you will have to manually enter your phone numbers into the new phone.

Uniden Lands... | Answered on Jun 19, 2019


one if these old land line thing-a-bobs>?
LAND LINES:? sure it is.

most land lines (gee endless world wide and collapsing)
I you actual PHONE has caller ID blocking turn it off, RTM
read the manual on your phone.
if say using AT&T, land line (wild wild guess) you have special *Number to call and you must reset that using THAT>

answered for both ways, and I refuse to read your manual, on any landline-anything, mines CUT CABLE at the CURB.

Uniden DECT 6.0... | Answered on Jun 14, 2019


Hold these 3 buttons all at once while turning the unit on (will take 2 hands)

Uniden BCT15X... | Answered on Jun 11, 2019


The problem sounds like a wiring fault to me. Landlines ring when the POTS (plain old telephone system) provides power on the receive wire. See https://www.lanshack.com/wire_phone_jack.aspx for the RJ-11 wiring diagram.

Try a different phone at the jack and a different telephone cord. If it rings constantly, that tells you the problem is with the wiring in the building or outside. You need to find where additional electricity is coming into the telephone wiring. Check the jack first. Most jacks either have screw terminals or keystones. Use the wiring diagram above to make sure that the wires are connected to the correct point. If you have the screw type of terminal, you need to strip the insulation from the conductors before securing the wires. For the keystones, leave the insulation intact. Then use a punch-down tool (available at most hardware stores in the electrical section) to push the wire into the correct slot in the keystone.

There must be a place where the insulation is damaged and touching another wire or water is in contact with bare metal and a current is flowing across the water. If only the Uniden phone rings constantly even with the new RJ-11 cable, replace the phone.

I hope this helps.

Cindy Wells

Uniden Lands... | Answered on Jun 11, 2019


Yes, it does sound like a bad power transformer. Try powering it using a DC supply or battery and see if the hum goes away.

Uniden BC60XLT-1... | Answered on Jun 09, 2019

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Uniden Experts

Marvin
Marvin

Level 3 Expert

85206 Answers

Ekse

Level 3 Expert

13434 Answers

The Knight
The Knight

Level 3 Expert

76140 Answers

Are you an Uniden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...