United Stationers Recent Questions, Troubleshooting Help & Support

Do you work here? Claim your company

  • 29 Products
  • 15 Answers
  • 606 Views

I do not know for sure but it sounds like the paper is not griped properly, this would cause the jagged lines. I would try another ink cart when the loose paper problem is resolved. I hope this helps.

United... | Answered on Apr 05, 2019


I would suspect that the you didn't get the drum back in properly. There are contacts on the drum casing that need to make contact with the base of the printer. It's possible that either it's not seated properly or that some toner is lodged over the contact preventing a good electrical connection. Try removing the drum again and carefully reinsert.

United... | Answered on Jun 16, 2017


i love google.... usually:

http://h30434.www3.hp.com/t5/Other-Printing-Questions/Photosmart-C8180-Ink-System-Failure-Error-0xc-18a0005/td-p/331285

If you need further help, I’m available over the phone at https://www.6ya.com/expert/robert_beef7390c57fac0d

United... | Answered on Jun 24, 2014


Unplug the phone calde from the fax machine and plug it in to phone. Do dial tone, is the other end connected to the outlet in the wall? Do you have a phone line to use as a fax line?

United... | Answered on May 20, 2014


It would probably be time for a new hard drive. You can try putting it in a plastic back and them put it in the freezer for an hour. Sometimes this gives you enough time to pull the data off. A drive recovery service would be the other option if the information on the drive is very important to you (Ontrack.com or Driversavers.com)

United... | Answered on Dec 18, 2013


I always use HP printers and every time i get a new operating system (vista, win7 etc) the HP software does not fully install. I go to HP.com to install the latest software for the appropriate OS but rarely get more than just the printer working. If i require the scanner or cd print features i have to do that from an older computer or older operating system that the printer was originally installed on.

United... | Answered on Oct 15, 2013


You should have an icon on your desktop called "HP Solution Center." Click on the icon, and look for "Printer Toolbox." Open the toolbox, and there should be a button which will print an alignment page.
If not, then click open your Start Menu, click on All Programs, scroll down to HP.... and look for Printer Toolbox. and proceed as above. If none of this works, go to : www.HP.com click on Support for your device (model name and number) and you should be able to get an answer there... Good Luck.
Joel Bergmann
joelb21@gmail.com

United... | Answered on Nov 04, 2012


Try cleaning the roller in the top of the doc feeder with windex and then try to feed another copy.

United... | Answered on Oct 25, 2012

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top United Stationers Experts

Dennis Webber

Level 3 Expert

933 Answers

Gil Shultz

Level 3 Expert

3388 Answers

Ravi

Level 3 Expert

1682 Answers

Are you an United Stationers Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...