Universal Office Recent Questions, Troubleshooting Help & Support

Do you work here? Claim your company

  • 32 Products
  • 22 Answers
  • 4K Views

Quickly the calculation can be done easily in your head. 2 ft x 2 ft x 1.5 ft = 6 cu. ft.
In inches, 18 x 24 x 24 = 10368 cu. in. Divide this by cu. inches in 1 cu. ft (12 x 12 x 12 = 1728) giving you a result of 6 cu. ft.

Universal Office... | Answered on Oct 12, 2014


Your question does not match the area you are in. I have no idea what your question is on the projection lamp and as for the rope you need to post more information. Not all are strung the same.

Universal Office... | Answered on Aug 08, 2014


It depends of what is wrong. Perhaps the storm has nothing to do with having an empty cartridge. Perhaps lightening, induced a little current in the printer or in the chip on the toner cartridge.
You only can find out, by placing another toner cartridge in its place. And don't wonder if the error still is there. But then you have to call in an service engineer, because something serious can be wrong.

At least i hope you at least remover the cartridge once, to see if all contacts on the chip (and in the printer) are still clean and shiny.
Only clean contacts with a dry cloth or a cotton swab. Vever use anything sharp.

Universal Office... | Answered on Jun 12, 2014


For mine to print I have to hit either the subtotal key, or the total key. (# and/or * )

Universal Office... | Answered on Jun 05, 2013


On the upper right corner of the bin opening you will see a slot in the black plastic. I taped a part of a business card into the slot and it now works. Just make sure to unplug the machine when the door is open.

Universal Office... | Answered on Jan 05, 2011


The rubber molding probably still has a coating of mold release on it form when made. Try some plain alcohol to remove it, or some dish soap and water. It may be a silicon based mold release agent which is very stubborn to remove.

Universal Office... | Answered on May 13, 2010


Unplug it and then open i t up. You are looking for a piece of shredded paper that is stuck or jammed. Can even be a accumulation of paper dust. The piece won't be that big but most of the time that is all that is wrong. The paper either jams the door sensor or blocks it and gives the error. It can also be a bad door sensor or switch. Not very common but can happen.

Universal Office... | Answered on Apr 25, 2010


Goto start setting control panel (add & remove programs) uninstall
the software that drives your unit , after re-installing the software
your unit will have fresh drivers installed , follow the steps for
your unit and you'll be back using your device .

Universal Office... | Answered on Feb 02, 2010


5 flashes says the printhead is not installed properly, you may need a new printhead,

Universal Office... | Answered on Oct 16, 2009


make sure that the ink cartridge is in the docking posistion on far left hand side of printer. press down firmly on the cartridge and then slide it out.

Universal Office... | Answered on Jun 24, 2009

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Universal Office Experts

Harrie

Level 3 Expert

6705 Answers

Gil Shultz

Level 3 Expert

3388 Answers

Kate Henkel

Level 1 Expert

30 Answers

Are you an Universal Office Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...