UTStarcom Logo

UTStarcom Answered Questions & Fixed Issues

Do you work here? Claim your company

  • 30 Products
  • 246 Answers
  • 25K Views

This a 12 year old phone.

UTStarcom CDM7025 Google Search

If removing the battery and reinstalling it doesn't work, I think you need a new one. That error message doesn't appear on any searches relating to a phone.

phone DATA ABORT Ox Google Search

You could try a Hard Reset, which clears everything off the phone, although it seems to indicate, it just deletes things you have saved. One a 'normal', 'modern' phone a hard reset reloads the operating system.

UTStarcom CDM7025 User Manual Default Settings Reset Phone

UTStarcom... | Answered on Dec 09, 2017 | 89 views


Unlock:
http://www.mobile-unlock.net



To learn how to insert the code look here:
http://www.mobile-unlock.net/blog/how-to-unlock-cell-phones/

UTStarcom... | Answered on Nov 30, 2017 | 100 views


That phone doesnt use sim cards. In the U.S., there are two different cellular technologies: CDMA and GSM (most of the rest of the world uses GSM). Up until 4G-LTE came along, CDMA phones didnt use sim cards. The cdm7176 is an older CDMA phone and thus doesn't have a sim slot.

UTStarcom Cell... | Answered on Oct 17, 2017 | 62 views


Depends on the phone but most likely it's under the battery. If not there, then look for a slot on the side of the phone, covered with either a small rectangular piece of rubber or an easily removed piece of hard plastic.

That being said, some models won't have a sim card. It depends on the carrier and the phone. Sprint, Verizon, & others that use their networks (such as Virgin) only started using sim cards when 4G LTE was launched. If the phone isnt designed for LTE and the phone is a CDMA phone (the technology that Sprint & Verizon use) then it wont have a sim card unless it the phone was also designed for use abroad (E.g. Europe).

UTStarcom Cell... | Answered on Oct 17, 2017 | 148 views


the only way to change that password is to send it into verizon.

UTStarcom Blitz... | Answered on Jun 27, 2015 | 1,702 views


http://www.dslreports.com/forum/remark,17021137
http://keison.co.uk/utstarcom/utstarcom_f1000.htm

UTStarcom... | Answered on Dec 30, 2014 | 200 views


This option allows you to transfer music files from your PC. In order to use this option, you must install V CAST Music with Rhapsody on your PC. 1. Open V CAST Music with Rhapsody software. Don’t have V CAST MUSIC with Rhapsody software? Download it for free at www.verizonwireless.com/music. 2. Install the device USB drivers before connecting your phone to a PC. USB Cable and Device Drivers can be purchased separately via the Music Essentials Kit compatible with this device. 3. From the main screen on your phone, the SYNC MUSIC V CAST MOBILE PHONE display appears. Your phone should display the message: Connected. Connection may take a few seconds. 4. Drag and drop the song(s) you want to sync from My Library, to your V CAST Music with Rhapsody mobile phone, listed under the Sources tab. Once synchronization is complete, press the END/Power Key and disconnect the USB cable (purchased separately). 5. Under the Music & Tones menu, open My Music to view and play your music. • A compatible USB cable (sold separately) is required for syncing. • Music can also be purchased via V CAST Music with Rhapsody through your PC.
Hope this helps, let me know if I can help you with anything else.
JimmyC

UTStarcom Blitz... | Answered on Oct 04, 2014 | 432 views


Sorry we can't help with that.

UTStarcom Blitz... | Answered on Jun 19, 2014 | 65 views


The factory restore should not take more than 5 minutes.

UTStarcom ... | Answered on May 15, 2014 | 43 views


Did you set the security password during the initial setup?

The 802.11N security pass packets between AP and card. Communication between AP to card is normal.

UTStarcom... | Answered on Jan 19, 2014 | 54 views


Hi if you are looking for code to unlock your pantech phone from its present network ..Then have a look at sites like Mobile-Unlocker.com here they are rendering unlock code for all mobile models at reliable cost .You first verify that whether they are rendering code for your mobile model, country and network.if yes then pay for it and unlock your phone ...

UTStarcom Blitz... | Answered on Dec 26, 2013 | 49 views


Have you tried *#06# and then "Ok" or "Call" or simply type in *#06# on the main menu (on the screen as you type numbers). If this isn't helpful, then it must be written somewhere inside the battery compartment. Turn off the phone and look inside the compartment where the model number is written.

If you need further help, let me know with the model name.

Good luck.

Thanks for using FixYa.

UTStarcom Cell... | Answered on Dec 24, 2013 | 64 views


Probably a bad cable. Try different cable. If still no results remove battery from the phone 5 minutes then re install, power up the phone and try again.

UTStarcom Cell... | Answered on Nov 02, 2013 | 21 views


first you go like this then this then this then this and stop, then this

UTStarcom At&t... | Answered on Sep 28, 2013 | 64 views


ha ha ha as you like i think you need to check battery first, if it shows in the screen that the battery still charging all they long but actually a faulty battery doesn't charge..

UTStarcom Blitz... | Answered on Sep 22, 2013 | 50 views


Do you mean the network unlock code?You can approach Classicunlocking.com and get the respective unlock code for your UTStarcom cell phone.You need to specify the mobile model,country,locked network and based on the availability get the unlock code along with free unlock instructions.

UTStarcom Cell... | Answered on Sep 13, 2013 | 64 views


If you are blocked by a firewall try changing the IPaddress according to your location
You can find an up-to-date list of all the AWS EC2 IP addresses here: https://forums.aws.amazon.com/ann.jspa?annID=1528
All Blitz HTTP requests will originate from these IPs.

UTStarcom Blitz... | Answered on Aug 11, 2013 | 72 views


There are a few things I am going to need you to do to get that touch screen working for you.
1. Turn off your phone and wait 15 seconds and then turn it on. This should clear any software issues you were having.
If that did not work then,
2. Take out the SIM card and then turn off your phone and turn it on again. Sometimes the SIM card is the problem and it can cause problems on your phone.
3. Update your devices software to the newest software available.
4. This is the most drastic way to fix a phone. Hard reset. This is a last resort option because it will reset everything on the device to the manufacture setting. This is how you do this for your phone.

Hold the two buttons to the left and right of the windows and then old and press the OK button.
Then press the reset button. PRess Y and it will do a hard reset. Anything additional you added to your phone WILL be erased.
5. If this did not work contact the manufacture for selling you a faulty device.

UTStarcom Htc... | Answered on Jul 23, 2013 | 57 views


screen still black / white it's not a screen problam .
it's belt problam
change your belt of cell who connect your slider to your keypad
that belt.

UTStarcom Blitz... | Answered on Jun 23, 2013 | 53 views

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top UTStarcom Experts

Ekse

Level 3 Expert

13434 Answers

k24674

Level 3 Expert

8081 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

29144 Answers

Are you an UTStarcom Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...