Yamaha Boating - Recent Questions, Troubleshooting & Support


I believe the P65 is a small engine with 3.5 hp.

Yamaha Boating | Answered 3 days ago


I got this free Pdf manual from reliable-store. com for free and I don't think Ive visited a mechanic or fixya for help for more than 3-4 times out of the 20 times I fixed the chipper in these 4 years

Yamaha Boating | Answered on Aug 21, 2019



I got this free Pdf manual from reliable-store. com for free and I don't think Ive visited a mechanic or fixya for help for more than 3-4 times out of the 20 times I fixed the chipper in these 4 years

Yamaha Boating | Answered on Aug 20, 2019


Not a problem if 1 drops below 60 issues will start. Put 5 oz of marvel mystery oil in the cylinder to help free up the rings. Pour in turn over engine do not start. Let sit over night.

Yamaha Boating | Answered on Aug 20, 2019


It should have a rubber hub pressed into the prop. It can go bad and is in place of a shear pin. The rubber hub should allow the prop to turn at idle speed but will slip at higher speeds. You can get a new hub pressed into the old prop.

Yamaha Boating | Answered on Jul 26, 2019


It is better to use gas with no ethanol as it can degrade your fuel lines. Also Ethanol is hydroscopic, it attracts moisture and sucks in moisture from the air when you winter store. If you do, then you have to use stabilizer over the winter.

https://www.google.com/search?q=ethanol+fuel+line+damage

https://fuelandfriction.com/weekend-warrior/why-use-fuel-stabilizer

Yamaha Boating | Answered on Jul 16, 2019


Either fuse, switch or pump itself. See your friendly mechanic

Yamaha Boating | Answered on Jul 14, 2019


If water pump is good and cooling engine, I would look into the fuel pump.

Yamaha Boating | Answered on Jul 09, 2019


Might be simple. Did you leave the Nav lights on and run the battery down? The clicking means it wants to go but may not have any power.

Yamaha Boating | Answered on Jul 09, 2019


Still under warranty, just contact the dealer. Maybe not trimmed right, boat loaded badly, or headwinds.

Yamaha 2014... | Answered on Jul 07, 2019


That is the same serial number of my Fender Telecaster guitar copy, made in Mexico.

Yamaha Boating | Answered on Jun 30, 2019


you will need to remove the carbs and clean them out. This may help:

Yamaha Boating | Answered on Jun 24, 2019


I think the model number can help you more for finding the year of manufacture. I couldn't find anything on the serial number. Also, if you contact a Yamaha outboard dealer, they can help you.

Yamaha Boating | Answered on Jun 22, 2019

Not finding what you are looking for?
Yamaha Logo

519 questions posted

Ask a Question

Usually answered in minutes!

Top Yamaha Boating Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Mike

Level 3 Expert

4359 Answers

Vincent G
Vincent G

Level 3 Expert

2361 Answers

Are you a Yamaha Boating Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...