Zanussi Logo

Zanussi Recent Questions, Troubleshooting Help & Support

Do you work here? Claim your company

  • 284 Products
  • 6K Answers

If the washer won't drain there might be a clogged pump or hose. It's common for small socks or other small clothing items to get into the water drain system and clog the hose leading to the pump or the pump itself. Remove the hoses from the pump in order to remove the article of clothing.

Zanussi Washing... | Answered on Jun 29, 2019

E20 means problem with drain water phase
Only two things need to be checked:

- Drain pump could be clogged or no power supply (the last means
faulty drain pump, faulty electronic or wiring between drain pump
and electronic.
- Your home drainage system (in the wall) is clogged (This is very
easy to check visually, disconnect the drain hose from your
siphon and put water in some container or in washbasin.)


Zanussi Washing... | Answered on Jun 15, 2019

Highly unlikely any damage will have been done so long as it hasnt been in use for a long time (weeks).

In a front loading washing machine, most of the mechanicals inside are held between springs at the top and dampers at the bottom. The transit bolts are used to minimse how much movement can ocour whilst the machine is in transit as excessive movement could damage the springs/dampers. When they are removed, normal movement of the mechanicals helps keep the machine stable and minmises vibration.

So, the worst that happens when the machine is used with the transit bolts in place is it vibrates alot, and possible moves about.

Remove the bolts as soon as possible and it should be fine.

Zanussi ZWF12070... | Answered on May 23, 2019

E30 can be a faulty pressure switch,Heating element earth fault or the main P.C.B.(Programmer).Does the machine fill with water then empty.
Most common fault is the heating element,once this is replaced it should cure the fault.

Zanussi ZWF1430W... | Answered on May 19, 2019

Hello Carole Timpson! Despite its an old topic, I have something to say. If your grill switches off after 20 minutes and came back on when cool its a sign that you should purchase a new one. I would recommend you to check gas grills under 500 like here for example. Sometimes it's better to buy a new one because the repair is too overcomplicated or expensive.

Zanussi Ovens | Answered on May 01, 2019

Miele dishwasher G7856 with a F09 or F08 fault , I fixed by unblocking the cold and hot water inlet hoses and filters and valves

Zanussi 29 in.... | Answered on Apr 23, 2019

ask Zanussi corp what that error means . Google it as we could

Zanussi Ovens | Answered on Apr 04, 2019

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Zanussi Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers


Level 3 Expert

85160 Answers

Jason Harris
Jason Harris

Level 2 Expert

274 Answers

Are you a Zanussi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides