Zodiac Logo

Zodiac Recent Questions, Troubleshooting Help & Support

Do you work here? Claim your company

  • 188 Products
  • 635 Answers

the flow gauge goes on the end of the vacuum hose where you would normally plug the cleaner into.
The gauge is only used in the initial setup stage to set the correct flow rate and then the gauge is taken off and the cleaner put on

Zodiac Pool &... | Answered on Jul 16, 2019


Zodiac Watches | Answered on Apr 23, 2019

2 possible answers.
1 have you put a deflection ring on the cleaner. If not do so
2 you could use a hose motor to pull the cleaner away from the upstand. A hose motor is a cuff that goes on the hose about half way and pulls the hose along. On a long/wide pool you might need 2.

Zodiac Baracuda... | Answered on Mar 31, 2019

Check that it is the wheels not turning and not the rubber tractor tyre sprockets are not worn down and therefore not moving.

Zodiac Pool &... | Answered on Nov 25, 2018

check belts on both sides or motors

Zodiac Baracuda... | Answered on Nov 25, 2018

Move the cannister back in the hose line. (closer to the inlet)

Zodiac Baracuda... | Answered on Nov 25, 2018

put by water outlet to fill then hook up

Zodiac Pacer... | Answered on Oct 06, 2018

same damn problem. they say its not covered

Zodiac ZMX 03... | Answered on Aug 07, 2018

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Zodiac Experts

john h

Level 3 Expert

22203 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

28447 Answers

Tom Chichester

Level 3 Expert

53109 Answers

Are you a Zodiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides