Press enter to search.
If you don't take a swing,you'll never hit a home run.
Jimmy posted an answer for this GE Microwave Ovens:
"Hi Toan, first question is how old is the microwave? If it is less than 5 years with no..."
Jimmy posted an answer for this Kenmore Washing Machines:
"Hi Betty, f8 e3 error code means the machine is reading a water level that is too high...."
Jimmy posted an answer for this Maytag Washing Machines:
"Hi Andrea, your machine has a bad tub bearing. Considering the age of your machine, you..."
Jimmy posted an answer for this Washing Machines:
"Hi Lori, you shouldn't have to grease anything on that machine. What is the problem with..."
"Hi Debra, an f11 error code is a disruption of communication between the input control..."
Jimmy posted an answer for this Whirlpool Washing Machines:
"Hi Toni, part kit 285811 will fit your machine. If you only need to replace the worn dogs..."
"Hi Kim, what you need to do is lean the washer back to see where the leak is coming from...."
"Hi Angela, you should contact Whirlpool directly and find out if that is a common..."
Jimmy posted an answer for this Asko Washing Machines:
"Hi Jacqueline,the filter will usually have a rubber o-ring gasket to seal the opening to..."
"Hi Paul, first piece of advice is to make sure the loads of laundry are consistent. A pair..."
Jimmy posted an answer for this Samsung Washing Machines:
"Hi Joyline, definitely run the machine through a cleaning cycle again using a washing..."
"Hi, try using a pair of slip joint pliers. Open them about half way then place one jaws on..."
"Hi Nder, machines that think scare me. Remember what happened in Terminator. They'll try..."
Jimmy posted an answer for this Siemens Washing Machines:
"Hi Cleopatra, e18 error code is a drain problem. Probably a sock or other debris clogging..."
"Hi JR,you have a bad tub bearing. Replacing the tub bearing is a complex job as it..."
"Hi Lola, if you can't find a visible filter access, then you will have to tilt the machine..."
"Hi Petra, if the unit is not filling with water you most likely need a new fill valve. If..."
"Hi Ryan, an E2 error code is a stuck button on the control panel. Try pressing the buttons..."
"Hi, does the door seat fully or is it just not latching when door is fully closed?..."
"Hi Christopher, it sounds like you have a broken motor coupler. It's the part that makes..."
Jimmy posted an answer for this DCS Ovens:
"Hi Lou, sounds like you have a bad igniter. If it's not drawing enough amps it won't open..."
"Hi Steve, from what you're describing,it sounds like you've got a bad door lock motor. It..."
"Hi Geoff, your washer has a bad tub bearing. Depending on the age of the unit and how much..."
Jimmy posted an answer for this LG Washing Machines:
"Hi Santhosh, a PE error code is a water level/pressure switch problem. Could be one of..."
"Hi LakerFan, an LE code is generally a motor overload situation. A large comforter or a..."
"Hi, E2 code is a stuck button on the control board. Try wiggling each button then try..."
Jimmy posted an answer for this Kenmore Refrigerators:
"Hi, newer refrigerators have a small fitting at the end of the drain hose from the..."
Jimmy posted an answer for this Bertazzoni Kitchen Ranges:
"Hi Royce, for the oven temperature issue try to find the owners manual,it will give you..."
Jimmy posted an answer for this Ovens:
"Hi Offir,sounds like the lock motor has just died. Doesn't happen often but problems like..."
"Hi Douglas, washing machines usually do hav a capacitor but it is there to help the motor..."
Jimmy posted an answer for this Refrigerators:
"Hi Angela,depending on the style of refrigerator you have it could be a couple of..."
Load more activity...
12,182 people helped
View all achievements