Press enter to search.
Victor posted an answer for this Estate White-on-White TES325MQ Electric Range:
"IS THE BOTTOM OVEN COIL/ELEMENT TE SAME IN MOST 30" MODELS. MINE JUST WENT OUT. IM..."
"Hi, All bake elements are not the same. The part # for your bake element is #9758519...."
Victor posted an answer for this Frigidaire GLTF2940ES Front Load Washer:
"Hi, The front panel does not open. HYou need ro access the pump from the rear of the..."
"How do I remove the bottom cover of my access pump tp check my Frigidaire front load..."
Victor posted an answer for this Refrigerators:
"fridge verynoisey when fridge door is shut, quite when opened. now inside fridge getting..."
"Hi, Sounds like the evaporator fan blade is hitting something. Probably frost that is..."
Victor posted an answer for this Kenmore Dryers:
"the electric heating element does not cut off when dryer is turned off."
"Hi, The element has to be shorting out against the housing it is located in. Replace the..."
"Hi, Sounds like the belt broke. UNPLUG the dryer. This model you need to remove the two..."
"My Kenmore 80 series gas dryer will turn on but won't spin"
"Hi, First thing you want to chack will be the fuse. UNPLUG the dryer! Remove the rear..."
"Dryer stopped near end of cycle and will not restart. I checked the circuit breaker - no..."
Victor posted an answer for this Dryers:
"Timers are not advancing through cycle. Dryer just continues to run. Thank you for your..."
"Hi Chuck, If the dryer is heating up and the timer will not advance in either time or..."
"Hi, If the dryer heats in the automatic cycle and the timer still does not advance, try..."
"our 12 year old kitchenaide prestige dryer's timer gets stuck and it does not shut off..."
"Hi, UNPLUG the dryer! Remove the rear panel of the dryer and locate the fuse. It is white..."
Victor wrote a tip for Washing Machines:
"Removing the cabinet UNPLUG the washer. There are two screws holding the control panel to..."
"How to replace the dog kit in agitator To replace the dog kit in the agitator, remove the..."
Victor posted an answer for this Washing Machines:
"Hi, there is a hose that conects the water level switch to the rear of the tub. Sometimes..."
"my kenmore top load washer will not stop filling with water i have replaced the inlet..."
Victor posted an answer for this Kenmore 98702 Stacked Washer/Dryer:
"Hi, There are no adjustments. Make sure the pulley on the idler and the drive pulley are..."
Victor posted an answer for this Whirlpool Ultimate Care II LSQ9549L Top Load Washer:
"Hi, This agitator is a 2 piece agitator. Can you see if the lower half on the agitator is..."
Victor posted an answer for this Maytag PAV2300 Top Load Washer:
"Hi, The most common problem is the thrust bearing kit. The thrust bearing is located on..."
Victor posted an answer for this Kenmore 24032\24036 Top Load Washer:
"Hi, The lid switch in located in the opening of the cabinet where the lid closes. If the..."
"Hi, The top of the dryer usually gets to hot when there is an airflow issue. Check the 4"..."
"Hi, The first thing you want to check is the inlet tube that sticks through the rear wall..."
"Hi, Sounds like the belt has broke. These instructions fit most models. If they do not..."
"Hi, The most popular squeeling issue in the Maytag dryer is caused from the idler pulley...."
Load more activity...
308,705 people helped
View all achievements