Press enter to search.
10 yrs. of helping sewers with their problems.
SewTechWayne posted an answer for this PfaFF Creative 7570:
That model does not track stitches or hours.
SewTechWayne posted an answer for this Singer Sewing Machines:
Looks like your machine is stuck in needle bar lock out (or basting stitch)..."
SewTechWayne posted an answer for this Bernina Sewing Machines:
In general all of the DC motors in today's machines are not repairable.
SewTechWayne posted an answer for this Pfaff Creative 4.0 Sewing Machnie:
"Look under the tools menu. There should be a setting for straight stitch needle plate or..."
SewTechWayne posted an answer for this Sewing Machines:
What make and model is this?
It is probably the transducer. This is the part that the hose from the foot..."
"We haven't been able to get that motor for years. I don't know of a replacement..."
SewTechWayne posted an answer for this Husqvarna Sewing Machines:
This capacitor is not necessary. It was used back in the day to reduce noise..."
SewTechWayne posted an answer for this Brother Sewing Machines:
"This could be a couple of things.
If the hand wheel is stiff then it is some sort of jam..."
What make and model is your machine?
SewTechWayne posted an answer for this PfaFF Sewing Machines:
"It adjusts the needle plate position front to back."
"That is the motor belt.
Check the pulley on the motor, if it is loose it may need to be..."
SewTechWayne posted an answer for this Janome Sewing Machines:
"Could be the motor belt came off or broke.
"It adjusts the position of the needle plate front to back.
"That is usually a bad feed stepper motor.
"If you remove the batteries (on the bottom of the machine) and wait about one day, the ..."
"You may have lint build up under the needle plate between the feed dogs. Pop it off and..."
"It is possible one or more of the keys are stuck. If not then probably needs a circuit..."
"Sounds like a bind in the slide block which you get to from the back. It is near the hand..."
"Sounds like the timing belt is skipping and needs to be replaced.
"You may have an old style transformer and/or a hook that is not grounded.
Both parts are..."
Looks like the slide block is bound up. Sometimes this is an easy fix for a..."
"Looks like the gears are loose or broken."
"Is the stitch width dial set to 5? If it is on 0 then you will only get a straight..."
"Sounds like the motor belt is off or broken.
"The message means that the motor is drawing too much current. Could be a mechanical bind..."
"Try removing the needle plate and cleaning out lint between the feed dogs.
What is the make and model of your machine?
"Sounds like the transformer is going bad. Either that or the main motor."
"Sometimes it is just a bunch of lint built up under the needle plate between the feed..."
SewTechWayne posted an answer for this Janome Memory Craft 4000 Sewing Machine:
"You can use a class 15 bobbin or a Janome bobbin.
Load more activity...
49,578 people helped
View all achievements