Press enter to search.
Love Swiss Elnas
Tally Girl posted an answer for this Elna Sewing Machines:
"Yes it does, there is a little button in front base just near reverse lever, which..."
Tally Girl posted an answer for this Sewing Machines:
"Sounds like a looper is out of time and touching the other looper or needle. Change..."
"Depends on the make and model, some machines u can lower the feed dogs. Others have a..."
"It will be the thread, upholstery thread is not ideal for domestic machines. A polyester..."
"Have you pulled up the thread aerial to full height? Check the thread path of the thread..."
"according to the website sewingpartsonline, this item will fit your machine (Im assuming..."
"have you turned the stitch length and stitch width dials back to zero? this is important..."
"The Carina came with a metal plate that you clip over the feed dogs onto the metal plate..."
"No, the Carina came with a standard zig zag plate and 5 feet I think from memory, the..."
"please see my previous response on this problem here..."
"The spring that holds the bobbin extractor is probably stretched out causing this; as a..."
"The Elnita is the entry level model in the Air Electronic compact series, there is no..."
"Firstly check that you have the top thread going through the tension device and threaded..."
Tally Girl posted an answer for this Home:
"I would suggest that you go to Yahoo Groups, then ask to join the group called Elna..."
"The Lotus should have the integrated foot controller and power cord in one. Some of these..."
"I'm asuming you have the integrated foot controller and power lead in one, yes these are..."
"Your AE 68 will have three dials across the front, from L-R, stitch selector, stitch width..."
"Your Elna AE SU (made by Tavaro Switzerland) model number will be a two digit code and..."
"The cassettes have a little tab you pull on which folds flat afterwards.
"so looping on underside indicates top thread is not in tension, you need to recheck your..."
"Yes, because a zig zag stitch is creating a wide stitch and the tension on the thread is..."
"look for red dots marked on the machine, or inside the front cover over the lower loopers..."
Tally Girl posted an answer for this Elna Heirloom Edition 6005:
"it will be one of a couple of things, easiest to fix would be needle in backwards, not..."
"this could be a couple of things, all relating to threading up, your thread is either..."
Tally Girl posted an answer for this Elna Quilter's Dream 6003Q:
"I would suggest that you don't use this thread, it is too fine for the tension device on a..."
"you need to set the stitch width dial to zero, the stitch length dial to zero so that the..."
"push down on the shiny metal centre spindle that holds the cam, this pops the cam up off..."
"I have looked but can't see a manual, but looks like push button stitch selection on front..."
Load more activity...
313,582 people helped
View all achievements