Chevrolet HHR - Popular Questions, Answers, Tips & Manuals
My 2008 chevt hhr is having intermittent starting problems. The Passcode 3 system is in the car. The anti theft light came on 3 weeks ago then shut off.
DUring those periods when it doesn't start, does the security light flash? If so, there's a trouble code stored. Also, GM has issued a service bulletin advising you to remove all other electronic devices from the vehicle before starting anti-theft diagnosis. That means removing phone charges, dash cams, even extra transpoder keys from your key ring.
Also, BTW, thanks for not telling us the year, make, model. we know it's a national security secret, but it help technicians to know what vehicle you're asking about.
21 views | 0 helpful votes
2010 CHEVY HHR GLOVE BOX WON'T OPEN
Hi there's this website something like reliable-store and it is very amazing for manual for repairing servicing anything
someone on fixya recommended it to me and I thank him even today
They have full manuals and it's verrrrry cheap and mine
I got free in offers
3rd time I bought it, I also had an issue with the file so the girl replaced it in 30 mins
there is one website more but i don't remember its name it was 2 years back bitman something link this
Try these out brother
19 views | 0 helpful votes
How to put into a 2007 hhr Chevy blower motor resistor?
Michael, look under your glove box. You will see a black cover held on by the same kind of fasteners that hold the inner door panels on.(Auto Part Stores sell a special tool to remove these) I've use a pair of side cutters too just be careful not to cut them. Drop that panel and with a flashlight look up to the left of the Blower Motor on the Firewall and you will see the resistor.
It is held up there by two tabs, one in the front and one in the back. I recommend releasing them before you unplug the electrical connection to prevent breaking the plastic tabs. Once released you can unplug it, plug in your new one and snap it back into place. The best price I found was Rock Auto for $19.99 plus shipping.
Most Auto Part Stores wanted $45.99
Hope this helps you, if so Please click on Helpful. Thanks!
37 views | 0 helpful votes
Where is vapor canister purge Solenoid located 2009 HHR SS 2.OL
Evaporative Emission Canister Purge Solenoid Valve Replacement
Remove the air cleaner assembly from the studs and reposition to the side.
Disconnect the evaporative emission (EVAP) canister purge valve electrical connector (1).
Disconnect the EVAP canister purge valve tube from the intake manifold. Refer to Plastic Collar Quick Connect Fitting Service.
Disconnect the chassis EVAP vapor line from the EVAP canister purge valve. Refer to Plastic Collar Quick Connect Fitting Service.
Remove the EVAP canister purge valve bracket bolt.
Remove the EVAP canister purge valve with bracket.
Remove the EVAP canister purge valve from the bracket.
Inspect for carbon release in the EVAP canister purge valve ports. If there is any loose carbon, replace the EVAP canister and any components necessary to remove the carbon particles.
Install the EVAP canister purge valve to the bracket.
Position the EVAP canister purge valve with bracket to the cylinder head.
Caution: Refer to Fastener Caution.
Install the EVAP canister purge valve bracket bolt.
Tighten the bolt to 18 [n-m] (13 lb ft).
Connect the EVAP canister purge valve tube to the intake manifold. Refer to Plastic Collar Quick Connect Fitting Service.
Connect the chassis EVAP vapor line to the EVAP canister purge valve. Refer to Plastic Collar Quick Connect Fitting Service.
Connect the EVAP canister purge valve electrical connector (1).
Position the air cleaner assembly and install onto the studs.
144 views | 0 helpful votes
When I left ck my 2008 HHR my rear hatch doesn't lock.us it the fuse?
Could be ,could also be the L/GATE RELSE relay #18 located in the under hood fuse / relay box . Does your vehicle have a sunroof .? Fuse # 10 20 amp LIFT/GATE / S ROOF
Could be a BCM - body control module problem , or lock actuator it self . If the fuse an relay are good , doing some electrical testing would need to be done . Plus hooking a scan tool an checking for DTC'S - diagnostic trouble code's in the BCM .
38 views | 0 helpful votes
Not finding what you are looking for?