Hyundai Cars & Trucks - Recent Questions, Troubleshooting & Support


there is a handle in the inside of the trunk
im sure you can get to it thru the back side of your back seats
once seats down you will find it on the left side (as you face the back of your car)
pull that handle and open the trunk, once you open the trunk make sure your trunk latch is not set into lock mode there is a small lever on the right side of it and small pictures with a lock and unlocked
make sure is on unlocked and i hope it solves your problem.

Hyundai Cars &... | Answered on Jan 22, 2020


EVAP purge valve may be stuck open allowing raw fuel fumes to flood the engine .

Hyundai Cars &... | Answered on Jan 21, 2020


bad spark plug, wire , coil or injector... get it tested if you dont know how

Hyundai Cars &... | Answered on Jan 21, 2020


Hyundai 2011 "PRESS BRAKE PEDAL TO START ENGINE ...

? 3:03
www.youtube.com/watch?v=4f4nS6BpNJY
Jul 16, 2012 - Uploaded by rdsinsandiego 2011 Hyundai Sonatas have been reported on the net by a few to have a random problem ... i have 2013 Hyundai sonata and the engine won't start when i use the key and turn on .... Had similar problem with my 2012 Elantra.

2013 Hyundai Elantra won't start - YouTube

? 0:24
www.youtube.com/watch?v=uVNMgSE0nNA
Aug 29, 2013 - Uploaded by hellogoodbye1185
It will be fine for a couple of weeks then one day just won't start. ... my 2013 hyundai elantra also would not start but all the lights and radio were working .... Hyundai 2011 "PRESS BRAKE PEDAL TO START ENGINE" problem ...

2012 Hyundai Elantra Starting Issue - YouTube

? 0:57
www.youtube.com/watch?v=pDzSgucZ1tw
Oct 10, 2012 - Uploaded by carupz421
So if your Elantra won't start, turn the key to where you can move the shift .... Having exact same problem on my 2011 elantradid you find out ...


Hyundai Cars &... | Answered on Jan 20, 2020


The cable came loose in the truck. It is probably under warranty, the dealer will replace whole cable. If not, then look and you will see a bracket that the cable has come off of. Just push back in.

2017 Hyundai... | Answered on Jan 20, 2020


It is your Inhibitor switch aka Neutral Switch. It is located on your transmission. Even though you do not have an engine light on, the code is pending. You can have code pulled at auto parts store. Part is $50, easy to install. In the mean time, pop the little cover by the shifter, that says Shift Lock Release, then put a flat head screw driver in there and push UP, move shifter to Neutral, then start.

Hyundai Cars &... | Answered on Jan 20, 2020


They are usually on the rear of engine, (between the engine and the driver). They will be tucked about half way down near the exhaust manifold. A small nut holds the wire in place. They will probably be a pain in the **** to get to.

2006 Hyundai... | Answered on Jan 17, 2020


Try page 20/101 (EMA-20) of the Workshop Manual [15. Remove the CKP sensor(A)] :

https://drive.google.com/file/d/1e7Kuoq5jNaJwScmNlsQRN2-MF2qbJCwc/view

( https://carmanualshub.com/hyundai-santa-fe-pdf-workshop-and-repair-manuals/ )

Hyundai Cars &... | Answered on Jan 14, 2020


Tighten to 14.46 ft/lbs and then turn 90°

Hyundai Cars &... | Answered on Jan 14, 2020


Insufficient Information

2003 Hyundai... | Answered on Jan 12, 2020

Not finding what you are looking for?
Hyundai Logo

43,321 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2004 Hyundai Santa Fe
2004 Hyundai Santa Fe

1,447 Questions

2001 Hyundai Elantra
2001 Hyundai Elantra

1,154 Questions

2000 Hyundai Accent
2000 Hyundai Accent

1,113 Questions

2006 Hyundai Sonata
2006 Hyundai Sonata

1,216 Questions

2001 Hyundai Accent
2001 Hyundai Accent

1,057 Questions

Top Hyundai Experts

Marvin
Marvin

Level 3 Expert

85223 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...