20 Most Recent 2008 Peugeot 207 CC Questions & Answers


Has the battery been run dead or disconnected for some reason? If so you may need the fault cleared with a scan tool.

2008 Peugeot 207... | Answered on Sep 28, 2016


Fuel filters are only fitted to Peugeot petrol engined cars in countries where poor quality fule is an issue.

2008 Peugeot 207... | Answered on Aug 02, 2016


The drain plug is situated on the final drive casing at the rear of the transmission (plug may need a square or hex drive wrench).

There is no level plug - the correct qty of oil must be measured and then poured in.
If Petrol 1.9 ltrs, diesel 2.0.

The oil is 75/80w.

2008 Peugeot 207... | Answered on Jul 06, 2014


What do want to change the fuel filter for they never need changing here in europe as the fuel delivery pumps in the fuel stations have micronic filters inside the pumps ,europeon law so it shouldnt need changing unless it corrodes away that is if its a metal casing .Their is a gauze filter on the fuel pump inside the tank but if this motror runs ok leave well alone and stop playing around trying to a boy racer sunday mechanic job ,change the oil every 5/6000 miles with a oil filter every third oil change and use the cheapest diesel/petrol engine oil you buy ,gap the plugs every other oil change and it will run like a dream ,stick to putting a boom boom box in and stick go faster stripe and leave it alone

2008 Peugeot 207... | Answered on Nov 29, 2013


Hello
The engine and automatic transmission in this vehicles drive train are fully electronically controlled by a computer called the PCM (Power Train Control Module). Whenever a problem like this occurs the computer stores a record of the problem (there are of course some exceptions to this, like the fuel pump, engine coolant temperature sensor and MAF sensor for instance) in the form of a fault code in its memory, to read these fault codes you must have the systems memory scanned with a special tool. Once the fault code(s) are read you then must perform the appropriate diagnostic testing to find and resolve the problem(s) DO NOT REPLACE ANY PARTS UNTIL A TRAINED TECHNICAIN HAS DIAGNOSED THE PROBLEM TO AVOID SPEDING YOUR HARD EARNED MONEY ON PARTS THAT MAY NOT CORRECT THE PROBLEM

2008 Peugeot 207... | Answered on Jul 23, 2012

Not finding what you are looking for?
2008 Peugeot 207 CC Logo

30 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Peugeot Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Marvin
Marvin

Level 3 Expert

85206 Answers

scj103

Level 2 Expert

104 Answers

Are you a Peugeot Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

207 Peugeot

  • 207 Peugeot

Most Popular Question

air bag fault power supply fault

  • Cars & Trucks
Loading...