20 Most Recent 2007 GMC Yukon - Page 4 Questions & Answers


A faulty speed sensor can cause the cruise control to disengage while your GMC Yukon is in motion.

2007 GMC Yukon | Answered on Mar 07, 2014


take it to the dealer before someone gets hurt...

2007 GMC Yukon | Answered on Dec 30, 2013


I AM HAVING THE SAME PROBLEM BUT MINE ONLY COMES ON WHEN I AM IN GEAR, IDLEING AT A STOPLIGHT OR IN A DRIVE THRU. TOOK IT TO GM AND THEY ARE TELLING ME IT IS A "P0300 AND P0301" CODES WHICH SAYS IT A VALVE TRAIN MIS-FIRE ( TO FIX IT IS A 2000.00 HEAD JOB) AND THAT IS WHY THE STABILITRAK AND ENGINE LIGHT COMES ON!!! IN MY RESEARCH SO FAR I HAVE FOUND NOTHING THAT TIES THE TWO TOGETHER.
I HAVE 102,000 MILES ON MINE AND IT RUNS PERFECT AND MPG IS THE SAME AS THE DAY I GOT IT. I WILL KEEP YOU UP ON WHAT FURTHER I FIND. I AM NOW IN CONTACT WITH THE GM DISTRICT SUPERVISOR.

2007 GMC Yukon | Answered on Dec 20, 2013


The problem is electrical, there is a sensor that is finding a problem somewhere. Its telling you this information when your kilometer screen shows you the errors. I suggest looking for a loose battery connections both battery side and starter side, look at all electrical connections that are visible. Check all your fuses check for vacuum leaks.

2007 GMC Yukon | Answered on Dec 13, 2013


Sounds like maybe a bad u-joint on the rear drive shaft. Be sure its in 2wd.

2007 GMC Yukon | Answered on Nov 25, 2013


Most vehicle door trims are held to the door panel by either screws or plastic "pop" connectors or a combination of the two.
There are obviously different methods for getting at those, but in general pop ones just require you to put a flat blade of some description between the door card and the door panel, then lever the door trim away. Most likely, the handles will have screws that need to be undone. some of these might be hidden behind plastic blanking caps. Window winders of the manual kind usually have a spring ring which holds them to the shaft. A piece of cloth run round the shaft between the handle and the door trim might remove the spring clip and then you will be able to work out how if manages to hold the handle in place.

John

2007 GMC Yukon | Answered on Oct 21, 2013


Buy a repair manual at an auto part store good wiring diagram in back of books. don't want to buy check one out of libuary. also go on a yukon forum many answers and information found there.

2007 GMC Yukon | Answered on Oct 04, 2013

Not finding what you are looking for?
2007 GMC Yukon Logo

545 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1999 GMC Yukon
1999 GMC Yukon

573 Questions

2004 GMC Yukon
2004 GMC Yukon

501 Questions

2001 GMC Yukon
2001 GMC Yukon

300 Questions

1996 GMC Yukon
1996 GMC Yukon

233 Questions

2005 GMC Yukon
2005 GMC Yukon

248 Questions

Top GMC Experts

Marvin
Marvin

Level 3 Expert

85216 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Yukon GMC

  • Yukon GMC

Most Popular Question

changed out ignition car start

  • Cars & Trucks
Loading...