20 Most Recent 2007 GMC Yukon - Page 8 Questions & Answers


If there REALLY is a requiremert to wax the door handes (and I severly doubt it) let the dealer show you where it is noted in the owners manual. He will not be able to find it, I am sure. I am also sure you have no way of wining this battle, considering the 07 Yukon is long out of warantee. The best you can do is tell hi he's full of **** and a liar. BUT!! if he's the only dealer in town, don't do that. You may need him someday.

2007 GMC Yukon | Answered on Nov 21, 2011


Problem may be stripped gears i engine. I had to replace the entire mechanism several months ago. Gears are not metal.

2007 GMC Yukon | Answered on Nov 21, 2011


Either the handle broke, or the linkage rod came loose. Your only recourse is to remove the inner door trim panel to find the problem with the handle, and fix it.

2007 GMC Yukon | Answered on Oct 13, 2011


Has this vehicle been left to sit for awhile without being started? If so, the battery may be dead and need to be recharged or replaced. But if your engine cranks that is not the case. It might also be that your security system has been activated and locked everything up (but I thing the door lights would work then). If the battery is charged and okay, then suggest you take the battery cables off the battery for a couple of hours and see if the secutiy system will deactivate. Or check your owners manual for resetting the secuity system.

2007 GMC Yukon | Answered on Oct 03, 2011


This could be several things. I would check the Fuel lines for pin hole leaks first, then the vacuum lines and finally the Fuel pump itself. Make sure to include the electrical connections from the fuel relay in the power distribution box all the way back as well as the fuel relay itself.

2007 GMC Yukon | Answered on Sep 23, 2011


The charging system is going bad, have the alternator load tested.

2007 GMC Yukon | Answered on Sep 23, 2011


Take a look at your engine mounts and specifically the mount on the front of the transmission. The motor mounts and transmission mounts gets worn out and this causes the problem.The mounts needs to be instructed.If worn out, then needs to be replaced. ---------- Replacing the faulty mount will help. Thanks.Helpmech.

2007 GMC Yukon | Answered on Sep 14, 2011


Hello, 1 quart in three thousand miles, great, awesome, wonderful don't worry about it. As long as you know it. This is normal for a lot of engines. For many Chrysler Motor Co. there engine would use a quart of oil in the first 500 miles and after that, none. Oil change, another quart in 500 miles.
I would drive that Chevy around the world. I wish you many hundreds of thousands of miles. GB..stewbison

2007 GMC Yukon | Answered on Aug 31, 2011

Not finding what you are looking for?
2007 GMC Yukon Logo

545 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1999 GMC Yukon
1999 GMC Yukon

573 Questions

2004 GMC Yukon
2004 GMC Yukon

501 Questions

2001 GMC Yukon
2001 GMC Yukon

300 Questions

1996 GMC Yukon
1996 GMC Yukon

233 Questions

2005 GMC Yukon
2005 GMC Yukon

248 Questions

Top GMC Experts

Marvin
Marvin

Level 3 Expert

85216 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Yukon GMC

  • Yukon GMC

Most Popular Question

changed out ignition car start

  • Cars & Trucks
Loading...