20 Most Recent 1992 Mazda MX-3 Questions & Answers

Sounds like a blockage in the heater matrix. Try a water hose to flush it through.

1992 Mazda MX-3 | Answered on Jun 01, 2017

You may have drilled thru firewall and cut a wire. Look very closely. Thank you and please leave feedback

1992 Mazda MX-3 | Answered on Jul 11, 2016

sounds like you have a vacuum leak somewhere is you ck eng light on ,

1992 Mazda MX-3 | Answered on May 26, 2015

Make sure the distributor cap and ignition wires are on correctly .If there're not it will not start.

1992 Mazda MX-3 | Answered on Apr 22, 2015

Check for possible vacuum leak, maybe a hose off or partially broken. Make sure your firing order is correct when reconnecting those wires to the new cap.

1992 Mazda MX-3 | Answered on Apr 22, 2015

Sit in the Distributor.

1992 Mazda MX-3 | Answered on Mar 12, 2015

check if power getting to bulbs, if is then the bulb holders may well be distorted due to heat and are not allowing bulbs to seat properly so renew the bulb holders , if no power to the bulb holders and the fuse is ok then its either a wiring fault , check the earth wire from the light cluster if ok them must be the switch

1992 Mazda MX-3 | Answered on Oct 15, 2014

10w30 and 3.5 quarts with filter change

1992 Mazda MX-3 | Answered on Jun 28, 2014

Sometimes when you park your car... like against a curb or something.. the steering system gets in a bind.. Try one more time by turning the steering wheel one way or another... as you're trying to get the key to turn... Simple, I know... but sometimes it works....

1992 Mazda MX-3 | Answered on Apr 02, 2014

Clogged catalytic converter 98% sure!

1992 Mazda MX-3 | Answered on Dec 11, 2013

These bigger fuses are sometimes bolted in. If you are looking at the fuse box under the hood, look on either side of the box. You should see little bolts to remove that will let the 100 amp come out. Oh yeah, disconnect the battery first!!!...Chris

1992 Mazda MX-3 | Answered on Dec 04, 2013

sounds like a bad crank sensor or ignition module if you can get the crank sensor off use an ohms meter and check it should be between 500 and 1500 ohms at 200 degrees if it is not replace if it checks ok it is usually the ignition module

1992 Mazda MX-3 | Answered on Aug 17, 2013

Not finding what you are looking for?
1992 Mazda MX-3 Logo

189 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1993 Mazda MX-3
1993 Mazda MX-3

118 Questions

1994 Mazda MX-3
1994 Mazda MX-3

87 Questions

1995 Mazda MX-3
1995 Mazda MX-3

72 Questions

2005 Mazda MX3
2005 Mazda MX3

-4 Questions

2007 Mazda MX3
2007 Mazda MX3

-3 Questions

Top Mazda Experts


Level 3 Expert

85223 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

MX-3 Mazda

  • MX-3 Mazda

Most Popular Question

instructions changing 100 amp battery

  • Cars & Trucks