20 Most Recent 2006 GMC Envoy Xl Questions & Answers


Mattkirkham - it could be loose bolts...or your water pump is going bad...view this link it should help you. http://forums.trailvoy.com/showthread.php?t=58351

2006 GMC Envoy... | Answered on Feb 26, 2018


Envoy 2002 2008 Workshop Service repair manual
My personal suggestion would be to go for these repair catalogs. I know this website reliable-store that i used to buy them from, and they sold online it was very good manual. Go ahead, I bet.

2006 GMC Envoy... | Answered on Jan 28, 2018


both the rear passenger side wont unlock ???? How many doors are on the passenger side ? Or both back doors don't unlock ? Two relays lock / unlock the back door's Not the lift gate . The BCM controls the relay's . The relay's are located in the rear fuse box . Under back seat .

2006 GMC Envoy... | Answered on Oct 24, 2017


Trans needs ajustn at throttlbody. Or may need internal maintenance. Car mite need a scan to get values or codes. May b idling to low or needs tuned up igntion

2006 GMC Envoy... | Answered on Nov 08, 2016


Bad plug or broken wire at the plug, at the alternator. Pull the plug off the alternator. Turn the key on and check for power and ground at the leads. No reading, probe the wires a couple inches back. If a read there fix or replace the plug. If you have a 3 wire plug, best to use an ohm meter. Test each wire separately. At the pin and a couple inches back on the wire. This test may include testing the wire back to the PCM and fuse panel. You'll need wiring schematics for this. The PCM is what fields the alternator to charge and supply power when the engine is running.

2006 GMC Envoy... | Answered on Aug 11, 2016


check the fuses to see if one has blown

2006 GMC Envoy... | Answered on Jul 28, 2016


This is a known problem, a software update to the PCM takes care of this problem. An update at the dealer is around $100.

2006 GMC Envoy... | Answered on Jul 01, 2016


P0134 - O2 Sensor Circuit No Activity Detected Sensor 1 Bank 1
P0135 - O2 Sensor Heater Circuit Malfunction Bank 1 Sensor 1
P0053 - O2 Heater Resistance Bank 1 Sensor 1
P0030 - O2 Heater Control Circuit Bank 1 Sensor 1
You need to replace the O2 Sensor Bank 1 Sensor 1
Carquest can help you get the correct part and help you locate it.

2006 GMC Envoy... | Answered on Apr 24, 2016


Bad crank sensor usually is the cause. Or fuel delivery

2006 GMC Envoy... | Answered on Dec 14, 2015


Google the code to see what it means.

2006 GMC Envoy... | Answered on Feb 22, 2015


On my s1s10, it was a blown fuse under the hood and front wheel hubs needing replaced. The bad wheel hubs were throwing abs and traction systems as well as no cruise. The noise from the hubs confused the abs sensors until they got new ones. Everything is one piece nowadays.

2006 GMC Envoy... | Answered on Nov 30, 2014


ingnition coils and or ignition control module

2006 GMC Envoy... | Answered on Sep 29, 2014


Check the hose and check where water comes out might be cloged .Also check the moter and fuse.

2006 GMC Envoy... | Answered on Jul 18, 2014

Not finding what you are looking for?
Cars & Trucks Logo

203 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2002 GMC Envoy XL
2002 GMC Envoy XL

112 Questions

2004 GMC Envoy XL
2004 GMC Envoy XL

15 Questions

2003 GMC Envoy Xl
2003 GMC Envoy Xl

253 Questions

2005 GMC Envoy Xl
2005 GMC Envoy Xl

170 Questions

Top GMC Experts

Marvin
Marvin

Level 3 Expert

85206 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Envoy XL GMC

  • Envoy XL GMC

Most Popular Question

06 gmc envoy xl

  • Cars & Trucks
Loading...