Top 20 2005 Chevrolet Tracker Questions & Answers


There is a little button inside the ignition switch that gets pushed out of the way when the key is inserted, and sometimes that button gets stuck in the closed position. It will chime until that button is released. You might have to replace the ignition switch. Sometimes you can play around with the key in the switch, or use a pick to work it free. Hopefully this can help you fix the problem. Best wishes.

2005 Chevrolet... | 475 views | 0 helpful votes


I got this free Pdf manual from reliable-store. com for free and I don't think Ive visited a mechanic or fixya for help for more than 3-4 times out of the 20 times I fixed the chipper in these 4 years

Chevrolet... | 26 views | 0 helpful votes


under the dash by the ECM

Chevrolet... | 52 views | 0 helpful votes


I would replace the fuel filter and fuel pump relay to start with. Then go from there.

Chevrolet... | 48 views | 0 helpful votes


shut off the caplock

Chevrolet... | 121 views | 0 helpful votes


Take your Tracker to a real mechanic who knows how to read and interpret codes.

Chevrolet... | 157 views | 0 helpful votes


Geo tracker and I believe suzuki sidekick

Chevrolet... | 48 views | 0 helpful votes


bad key switch on steering column

Chevrolet... | 611 views | 0 helpful votes


If your battery and alternator connections are clean and tight, then it is often a weak alternator. Time to have it tested.

Chevrolet... | 75 views | 2 helpful votes


I will need the year and engine type of your vehicle to provide assistance

Chevrolet... | 44 views | 0 helpful votes


I'm thinking here that the head of the bolts is not very thick in which case the socket you are using will need some modification. If you look in the socket you will see that there is a small lead in relief and this will only allow the socket to full engage on 1/2 of the bolt head. Place the socket in a vice and use a grinder to grind of the face of the socket until the sides are square across. This will give full contact with the bolt head inside the socket.. Another point, it is unusual to find metric bolts in a USA made engine so check out the other size metric sockets as European metric use 9-11-13-15-16-18-20 mm sizes compared to Asian 10-12-14-17-19-21 mm. in auto production.

Chevrolet... | 127 views | 0 helpful votes


make sure there is no obstruction going to the air cleaner and it has a new air filter .. it sounds like its getting choked somewhere.

Chevrolet... | 113 views | 1 helpful votes


if it is a high pitched growl it is most likely a wheel bearing starting to go out.

Chevrolet... | 308 views | 0 helpful votes


check that the ignition fusible link is intact. There may be an inertia switch that has shut down as it would recognise the spin out as an accident. Check with a service centre of an accredited auto electrician

Chevrolet... | 101 views | 0 helpful votes


Sounds like a Broken wire along the line or a melted together wire visually inspect the harness then probe the wires till you find the hot spot.

Chevrolet... | 541 views | 0 helpful votes


yes the cam sensor controls the engine timing

Chevrolet... | 119 views | 0 helpful votes


Drain plug? R&R pan for correct repair...

Chevrolet... | 22 views | 0 helpful votes


be looking at the door switches to see if one is out of adjustment..

Chevrolet... | 241 views | 0 helpful votes

Not finding what you are looking for?
Cars & Trucks Logo

3 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Chevrolet Experts

Marvin
Marvin

Level 3 Expert

85222 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Tracker Chevrolet

  • Tracker Chevrolet

Most Popular Question

car thinks key still in ignition

  • Cars & Trucks
Loading...