20 Most Recent 2006 Dodge Ram 3500 Truck Questions & Answers


I got this free Pdf manual from reliable-store for free and I don't think Ive visited a mechanic or fixya for help for more than 3-4 times out of the 20 times I fixed the chipper in these 4 years

2006 Dodge Ram... | Answered on Feb 02, 2019


fuel lines most likely sucking air at one of the connections.

2006 Dodge Ram... | Answered on Oct 29, 2017


on some of the older (1996-2000) Ram products, the transmission kick-down linkage crosses the throttle cable assembly. if someone has worked on that, it may be rubbing each other when you shift, causing the "bump" in RPM's.

2006 Dodge Ram... | Answered on Oct 10, 2017


You might want to locate the part from a junk yard.You can try online parts stores too.

2006 Dodge Ram... | Answered on Sep 14, 2017


Most auto part stores ,Autozone or advance auto parts,ETC.........

2006 Dodge Ram... | Answered on Jul 20, 2017


bad oil rings or main seals are blown or the oil lines going to radiator rusted thru

2006 Dodge Ram... | Answered on Dec 15, 2015


Wow...that is a lot of oil. I would look for a crack in the engine block.

2006 Dodge Ram... | Answered on Dec 15, 2015


Turbo seals going bad.....

2006 Dodge Ram... | Answered on Dec 15, 2015


Probably the 'throttle position' sensor. But do go and have your car put on a workshop diagnostic machine

2006 Dodge Ram... | Answered on Oct 26, 2015


Pull the fuse box off of the piller and look behind it there is corrosion o the relays I bet . FYI

2006 Dodge Ram... | Answered on Jun 16, 2015


it is possible that you may have had a sensor malfunction in one of your main systems. These sensors are there to put your engine into "limp in mode" so as not to cause more damage to the engine but yet allow it to be taken safely off the road and/or to your mechanic.

2006 Dodge Ram... | Answered on Jan 04, 2015


Single rear wheel - Remove both caliper bolts.. remove caliper and pads.. remove rotor.. they are usually rusted on pretty good.

Rear Dually- the rear rotors are mounted with the hub assembly.. you must first remove the rear axles.. then remove nut holding load on bearings.. then the rotor and hub assembly will come off as one unit.. removed rotor from hub..

2006 Dodge Ram... | Answered on Nov 05, 2014


Obviously the best way would be to replace the fuse box!
But reconnecting with an inline fuse would be the way to go!

2006 Dodge Ram... | Answered on Oct 08, 2014

Not finding what you are looking for?
Cars & Trucks Logo

392 questions posted

Ask a Question

Usually answered in minutes!

Top Dodge Experts

Marvin
Marvin

Level 3 Expert

85216 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Ram 3500 Dodge

  • Ram 3500 Dodge

Most Popular Question

one bad fuse holder in fuse panel 2006

  • Cars & Trucks
Loading...