Top 10 2001 Ford Explorer Sport Trac Questions & Answers

Cars & Trucks Logo

Question

  • 12,956 People Helped

where is the theft device reset and what does it look like

where is the theft device reset and what does it look like

Posted by on

Answer

  • Most Helpful of 1 Answers

Not sure I follow your question. The security module is built into the instrument cluster and is synced to the engine computer.

Posted on Jun 24, 2013

Question

  • 5,948 People Helped

My back automatic window went

My back automatic window went down and now won't come back up. No sound from motor. Checked fuses. Even took back seat apart but don't know what to do or what caused it. How can I get window to go back up?

Posted by on

Answer

  • Most Helpful of 3 Answers

it may need to be reset.

SECTION 501-11: Glass, Frames and Mechanisms 2001 Explorer Sport/Sport-Trac Workshop Manual
GENERAL PROCEDURES Rear Window Motor Initialization s1r~us~en~file=ani_caut.gif~gen~ref.gif CAUTION: Make sure that no obstructions are present in the power rear window system when carrying out this procedure.
NOTE: This procedure must be carried out when repairs are performed on any part of the power rear window system including when: the power rear window motor is removed from the window regulator drum housing, a new power rear motor is installed, a new power rear window regulator is installed, a new power rear window module is installed, and any operation in which grease or lubricants are applied to the power rear window system.
NOTE: All power rear window components (window glass module, window regulator, window motor, and glass runs) must be installed and torqued to specification before carrying out this procedure.
NOTE: Steps 1-6 must be completed within 30 seconds. The entire procedure must be completed within five minutes.
NOTE: Once the ignition key is turned to the ON position in Step 6, it must remain on until the entire procedure is completed.
NOTE: Steps 7 and 9 require that the power rear window control switch be held in the closed position until the power rear window motor stalls the window in the upper header seal. Step 8 requires that the window control switch be momentarily turned to the open position.

  1. Start with the ignition in the OFF position.
  1. Turn the ignition to the ON position.
  1. Press the power rear window control switch vent button six times.
  1. Turn the ignition to the OFF position.
  1. Press the power rear window control switch vent button six times.
  1. Turn the ignition to the ON position. The power rear window will move up-down-up-down approximately 20 mm (0.8 in). This movement indicates that the power rear window motor has entered initialized mode.
  1. Rotate and hold the power rear window control switch to the closed position until the window stalls in the upper header seal.
  1. Momentarily rotate the power rear window control switch to the open position and release. The power rear window will carry out a one-touch down operation until the window stalls at the bottom of the travel stop designed into the window regulator.
  1. Rotate and hold the power rear window control switch to the closed position until the window stalls into the upper header seal. Once this operation is complete, the window will move up-down-up-down approximately 20 mm (0.8 in). This movement indicates that the power rear window motor has been successfully initialized.
  1. Verify correct operation of the power rear window by moving the window to the fully open, vent, then fully closed positions.
------------------------------------------------------------------------------------
  • The power rear window is inoperative (Explorer Sport Trac only)
  • Circuitry.
  • Battery Junction Box (BJB) fuse 3 (30A).
  • Central Junction Box (CJB) fuse 20 (7.5A).
  • Power rear window control switch.
  • Rear window glass motor.
  • Go To Pinpoint Test K .

------------------------------

Posted on Sep 15, 2011

Question

  • 3,325 People Helped

band adjustments for a 5r55e

band adjustments for a 5r55e

Posted by on

Answer

  • Most Helpful of 2 Answers

that is the biggest bs answer I have heard Done it probably over 50 times, no problem. hate when people talk about things they dont know about.t. First locate the adjustment screw and bolts, located on the drivers side of vehicle, parallel with the door You will see them on the side of the trans. Loosen nuts turning Counter clockwise.. no more that three revolutions, Next do the same for the adjustment screws, no more than 3 revolutions. Tighten the adjustment screws to 10lb each using an inch pound torque wrench. then back off 2 revolutions. Tighten nus up to 35llb making sure not to turn adjustment screws, a two wrench process 10mm and 3/4,

Posted on Nov 30, 2015

Question

  • 3,168 People Helped

ABS fuse locations

I am trying to locate the location of the ABS fuse on a 2001 Ford Explorer Sport Trac. 4.0L with engine vin code E.

Posted by on

Answer

  • Most Helpful of 2 Answers

There are a total of 5 fuses for brake and abs functions 3 in central fuse box on the drivers side inside truck fuse #9 - 7.5 amp fuse #10 - 10 amp and fuse #11 - 7.5 amp then there are 2 big fuses under the hood in the main battery fuse box next to the battery fuse # 6 - 50 amp and fuse # 28 - 30 amp

Posted on Jun 01, 2009

Question

  • 3,075 People Helped

Where is the rear window

Where is the rear window relay located on the 2002 Ford Explorer sport trac. Not the rear door windows but the very back window.

Posted by on

Answer

  • Most Helpful of 1 Answers

  • The power rear window is inoperative (Explorer Sport Trac only)
  • Circuitry.
  • Battery Junction Box (BJB) fuse 3 (30A).
  • Central Junction Box (CJB) fuse 20 (7.5A).
  • Power rear window control switch.
  • Rear window glass motor.

NOTE: The power rear window motor is not on the multiplex link. Any diagnosis and testing carried out on the power rear window will not involve the GEM module. NOTE: The reinitialization procedure must be carried out when repairs are performed on any part of the power rear window system including when the power rear window motor is removed from the window regulator drum housing, a new power rear motor is installed, a new power rear window regulator is installed, a new power rear window module is installed, and any operation in which grease or lubricants are applied to the power rear window system.

Rear Window Motor Initialization s1r~us~en~file=ani_caut.gif~gen~ref.gif CAUTION: Make sure that no obstructions are present in the power rear window system when carrying out this procedure.
NOTE: This procedure must be carried out when repairs are performed on any part of the power rear window system including when: the power rear window motor is removed from the window regulator drum housing, a new power rear motor is installed, a new power rear window regulator is installed, a new power rear window module is installed, and any operation in which grease or lubricants are applied to the power rear window system.
NOTE: All power rear window components (window glass module, window regulator, window motor, and glass runs) must be installed and torqued to specification before carrying out this procedure.
NOTE: Steps 1-6 must be completed within 30 seconds. The entire procedure must be completed within five minutes.
NOTE: Once the ignition key is turned to the ON position in Step 6, it must remain on until the entire procedure is completed.
NOTE: Steps 7 and 9 require that the power rear window control switch be held in the closed position until the power rear window motor stalls the window in the upper header seal. Step 8 requires that the window control switch be momentarily turned to the open position.
  1. Start with the ignition in the OFF position.
  1. Turn the ignition to the ON position.
  1. Press the power rear window control switch vent button six times.
  1. Turn the ignition to the OFF position.
  1. Press the power rear window control switch vent button six times.
  1. Turn the ignition to the ON position. The power rear window will move up-down-up-down approximately 20 mm (0.8 in). This movement indicates that the power rear window motor has entered initialized mode.
  1. Rotate and hold the power rear window control switch to the closed position until the window stalls in the upper header seal.
  1. Momentarily rotate the power rear window control switch to the open position and release. The power rear window will carry out a one-touch down operation until the window stalls at the bottom of the travel stop designed into the window regulator.
  1. Rotate and hold the power rear window control switch to the closed position until the window stalls into the upper header seal. Once this operation is complete, the window will move up-down-up-down approximately 20 mm (0.8 in). This movement indicates that the power rear window motor has been successfully initialized.
  1. Verify correct operation of the power rear window by moving the window to the fully open, vent, then fully closed positions
---------------------------------------------------------------------------------------------

Posted on Nov 16, 2010

Question

  • 1,920 People Helped

how to change fuel filter on 2001 ford explorer

how to change fuel filter on 2001 ford explorer sport trac

Posted by on

Answer

  • Most Helpful of 1 Answers

it in the tank so your gonna either gonna have to drain the tank and lower it to the ground,it shouldn't take more than 30 minutes.make sure you put the seal back in right,so it won't leak,it aint very hard.

Posted on Jul 12, 2009

Question

  • 1,913 People Helped

the overhead compass/temp gauge is

the overhead compass/temp gauge is not working. how can I fix it? I have a 2002 ford expedition sport trac. thanks

Posted by on

Answer

  • Most Helpful of 1 Answers

If the overhead lights are working but the console is not then it is a bad console. I offer a repair service in which I replace all of the faulty electronic components, and it includes a lifetime warranty. I have a bunch of tech info there; how to remove the console, etc. Check it out and drop me a note if you have any questions, thanks! www.autoclockrepair.com

Posted on Feb 27, 2011

Question

  • 1,610 People Helped

Our 2001 Ford Explorer Sport Trac will not shift into park at all. Right now to keep it from rolling my husband has to use the Emergency Brake each time we park. Is there something you can suggest t

Our 2001 Ford Explorer Sport Trac will not shift into park at all. Right now to keep it from rolling my husband has to use the Emergency Brake each time we park. Is there something you can suggest to repair this?

Posted by on

Answer

  • Most Helpful of 1 Answers

on each conventional auto transmission equipped car there is a steel wire/or a connection mechanism from shifter to transmission. sometimes is goes out of adjustment. you need to adjust it.(or goes loose)

yours is in steering column. actually back of steering column. there is a bracket. it must be loose. you will need to remove steering column panel first to reach it and you will see those bolts. you will need to be at your back when you are trying to reach it. you will need torx 27 ( i guess) find a good flash light to see the space.

i hope this helps.

ps. someone needs to hold shifter while your are adjusting.

Posted on Nov 20, 2011

Question

  • 1,529 People Helped

I have lost my only key to my 2001 Ford Explorer

I have lost my only key to my 2001 Ford Explorer Sport Trac..can I start it somehow without a key and how do I get a replacement key

Posted by on

Answer

  • Most Helpful of 1 Answers

Dealer OR Locksmith

Dealer you need your VIN number

Locksmith may just cut a key for your ignition

IS it a coded ignition ? then you definatly need a dealer
OR prokey company But they are limited to only certian model and year vehicles

Posted on Jun 22, 2010

Question

  • 1,496 People Helped

2001 ford explorer sport trac wont start all the function turn on

2001 ford explorer sport trac wont start or crank

Posted by on

Answer

  • Most Helpful of 1 Answers

check what the diagnosis machine will give if there is no data then check if the starter crank sensor is getting any power

Posted on Jul 26, 2010

741 questions posted

Ask a Question

Usually answered in minutes!

Top Ford Experts

Marvin
Marvin

Level 3 Expert

85222 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

gerry bissi

Level 3 Expert

4388 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

2001 Ford Explorer Sport Trac Explorer Sport Trac

  • 2001 Ford Explorer Sport Trac Explorer Sport Trac

Most Popular Question

2001 explorer sport fuel pump vacuum

  • Cars & Trucks
Loading...