20 Most Recent 2006 Nissan Altima - Page 2 Questions & Answers

Who "shattered" the contacts? Is this a theft problem?

2006 Nissan... | Answered on Jan 10, 2017

A screwdriver, rachet, an extension, and 8,10,12, and 14 MM sockets.

2006 Nissan... | Answered on Dec 20, 2016

YES you need them, ENG MTG is the Engine Management system, and the ENG CONT is the
Engine Control system so you see if they are disconnected you will have a good time wondering what is up with the car

2006 Nissan... | Answered on Dec 12, 2016

Check coolant level in reservoir under hood

2006 Nissan... | Answered on Dec 10, 2016

If you have done all the usual tune up stuff, check to see if holding the gas down a little helps. If so, could be a dirty/sticking idle air control valve. Other possibility is bad coolant temp sensor telling the ECU engine is warm when it is not.

2006 Nissan... | Answered on Oct 04, 2016

i need to know what ENG CONT AND ENG MTG means on the fuse box of my 2006 altima.

2006 Nissan... | Answered on May 03, 2016

Most parts stores will have a loan-a-tool pressure gauge. Your shop manual will have the pressure spec. Don't have a manual? You should buy one for lots of usful info.

2006 Nissan... | Answered on Mar 10, 2016

Try a can of Seafoam in it , can be purchased at any auto parts store. It really works wonders at cleaning sensors and injectors.

2006 Nissan... | Answered on Mar 03, 2016

Sounds like the wrong speedo drive has been fitted to the gearbox don't use after market parts only genuine

2006 Nissan... | Answered on Feb 19, 2016

behind the glove box

2006 Nissan... | Answered on Nov 28, 2015

most likely something go spilled into the shifter release mechanism. there is a manual release for the shifter, it is outlined in the owners manual

2006 Nissan... | Answered on Nov 28, 2015

The door switch isn't making a ground necessary to make the bulb work. If it's just one door, look at replacing the door switch. If none of the doors will work the light, then look at the body control module.

2006 Nissan... | Answered on Nov 23, 2015

Most auto supply stores ( NAPA ) will carry a socket that is designed to remove wheel locks. You may have to bang the socket on with a hammer and sometimes the nuts are hard to remove from the socket once taken off the car, but it works

2006 Nissan... | Answered on Sep 13, 2015

Look at the front of you A/C compressor with your A/C sent to max. the front of it should be moving with the rest of the pulley, if not you most likely have a leak and it's out of freon. If it's moving and still no cool are careful touch the pipes coming from the compressor, one is you hi side and the other low side. The smaller one (hi) should be warm or hot... the other (low) should be cold and sweating. If the clutch on the compressor is moving and those lines aren't hot and cold then your low on freon.

2006 Nissan... | Answered on Sep 03, 2015

Accelerator Pedal Position Error.

P2138 - Accelerator Pedal Position Sensor Circuit Range / Performance Problem

Clear the code - if it recurs, change the sensor.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

2006 Nissan... | Answered on Aug 27, 2015

Not finding what you are looking for?
2006 Nissan Altima Logo

940 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2005 Nissan Altima
2005 Nissan Altima

1,528 Questions

2003 Nissan Altima
2003 Nissan Altima

1,415 Questions

2002 Nissan Altima
2002 Nissan Altima

1,259 Questions

2001 Nissan Altima
2001 Nissan Altima

550 Questions

1995 Nissan Altima
1995 Nissan Altima

522 Questions

Top Nissan Experts


Level 3 Expert

85206 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Altima Nissan

  • Altima Nissan

Most Popular Question

while replacing blower motor resistor

  • Cars & Trucks