20 Most Recent
- Page 8 Questions & Answers
When the battery was change a electrical minder should have been hooked up, but now you will have to go to the dealer, unless its in the front or rear of your owners manual under radio code, follow the manual,and you should be able to reset it
on Jul 14, 2013
I replaced my power switch to the mirror and still does not work
If only one of the power mirrors is not working, and you replaced the power switch, the motor for the mirror can be faulty. Listen for any kind of "hum" from the mirror motor when the switch is engaged,thus indicating it is getting power, or if you have a test light($10.00) check for power to the mirror where your switch is connected and in the "on" position. So if you show power or hear the motor engaging but not moving, chances are that the mirror motor is faulty.
It is also possible that the connection between the mirror and the door could be loose. Especially if the door panel has been removed for any other repair inside the panel or maybe a stereo speeker replacement. Good Luck and God Bless.
on Jun 06, 2013
Vibration at idle
hi I had the same proble so I change the spart plugs, then Ifoud out that all I had was aspart plug stater coil an once Ireplace it my problem was
gone. No more vibration
ps hope this work for you as well
on Mar 26, 2013
Not finding what you are looking for?