20 Most Recent 2001 Honda Odyssey Questions & Answers


the 6 cylinder engine wil have 4 sensors

2001 Honda... | Answered on Jul 05, 2019


This is characteristic of a reset to the EMC (Engine control module). If the power is removed from the car during battery replacement the engine/driving parameters are reset back to the original factory settings. Running the car for about 10 to 15 minutes about 8 miles will begin the relearning to the idle.

Hope this helps?

PCM Idle Learn Procedure Honda Accord CarTrek com

2001 Honda... | Answered on Oct 09, 2018


This website www.reliable-store.com has the largest collection of
repair, service, parts manuals of any vehicle on earth. Best website I came across for manuals.. Very helpful website

2001 Honda... | Answered on Mar 09, 2018


its the transmission linear solenoids not the torque converter solenoids. you can buy the linear solenoids on ebay for about $100

2001 Honda... | Answered on Feb 28, 2018


At the rear of the brake lights, one of them, the driver ' s side, there is a "chip" that check the lightbulbs, so this could have gone back and you can by-pass the bad wire. You have to take out the brake light assembly to see it.

2001 Honda... | Answered on Jan 02, 2018


Check if the compressor is working.
looks like there is a problem with compressor , hence working intermittently.

2001 Honda... | Answered on Sep 10, 2017


It's fuse 11 in the passenger's side fuse panel.

0996b43f8024c9bf-in3r21ej5g3fzxozxvpl1pal-4-0.gif

2001 Honda... | Answered on Aug 13, 2017


You have a transmission fault, see a repair shop for testing.

2001 Honda... | Answered on Jul 05, 2017


Jason, im guessing you old ones are either broken or stripped. It will really depend on how long the bolts are.
You can take a punch and hammer, drive out the old ones. If the new ones aren't to long you can slip the new ones in from the back of the hub.
If you are able to slip them in, you can place one of the lug nuts on the stud ( backwards) and proceed to tighten the lug nut until the new bolt completely seats against the hub.
The reason you place the lug nuts backwards is so you don't damage the chamfer,tapered end of the lug nut.

Get back to me if you have any other questions, Robert

2001 Honda... | Answered on May 06, 2017


sorry unable to under stand question.
Can you give symptom detail plz

2001 Honda... | Answered on Jan 07, 2017


The OBD code P3102 means there is a "transmission control ECU malfunction".

You may be experiencing a hard shudder when you turn off the engine.

Possible causes could include: Faulty fuse or fuses, faulty wiring and/or Connector(s) from/to Intake Manifold Flap Motor or a faulty Intake Manifold Flap Motor.

Your possible solutions could include: Check for blown fuses, check wiring and/or connector(s) to and from the Intake Manifold Flap Motor, check or replace the Intake Manifold Flap Motor. You can also perform an Output Test.

2001 Honda... | Answered on Dec 03, 2016


There's a open circuit somewhere that's causing short.

2001 Honda... | Answered on Nov 28, 2016

Not finding what you are looking for?
2001 Honda Odyssey Logo

859 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Honda Experts

Marvin
Marvin

Level 3 Expert

85216 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Odyssey Honda

  • Odyssey Honda

Most Popular Question

2001 odyssey auto d4 geeen light flashes

  • Cars & Trucks
Loading...