20 Most Recent 1997 Geo Metro - Page 5 Questions & Answers

I'm syill working on the problem but I swapped the throttle bore assemby , put new cap & rotor amd double checked the timeing (Both belt & distributer with timing light) and engine still floods,. Wm going th check for kinked return hose next.

1997 Geo Metro | Answered on Feb 26, 2013

First, check fuses. Be certain circuits are getting power.

1997 Geo Metro | Answered on Feb 15, 2013

It could be the starter, test the small wire going to the starter, it should have power when turning the key to start/crank. If it does, and the starter will not crank the engine, whack it with a hammer, if it then starts, replace the starter. If there is no power to the starter, then it could be the ignition switch, or the neutral switch, or a fuse/link blown.

1997 Geo Metro | Answered on Feb 12, 2013

Check the crank shaft position sensor.

1997 Geo Metro | Answered on Feb 12, 2013

this is a Maybe fuel pump is getting weak are a bad head gasket or a plug fuel filter give this websites a try www.alldatadiy.com and www.autozone.com if all fails stop by your local library and get your hands on a Haynes auto repair manual for your car wish you the best of luck Michigan Man.

1997 Geo Metro | Answered on Jan 26, 2013

there should be a fuse for the direction light. and a direction switch can be bad and still click and operate as it suppose to

1997 Geo Metro | Answered on Jan 02, 2013

97 geo metro no spark fron coil set the timing still no fire replace crack. sencer. no spar k . whats wrong

1997 Geo Metro | Answered on Nov 26, 2012

You will need to replace the regulators, they are an incredibly cheap design

1997 Geo Metro | Answered on Sep 20, 2012

They come with a 3 or 4 cyl engine, but either way it would not take much to make it run rough.
Usually a miss-fire under load is ignition related.
Have you checked or replaced the plugs, cap, rotor, and wires ?
If not I would start with an inspection of that first.

1997 Geo Metro | Answered on Sep 15, 2012

8_20_2012_4_36_41_am.gif1997 Geo 1.0 or 1.3

1997 Geo Metro | Answered on Aug 20, 2012

if thie ie the yellow fuse it has to be bolted in check wireing at the fuse

1997 Geo Metro | Answered on Aug 18, 2012

regulator is on the top of the throttle body secured by 4 screws

1997 Geo Metro | Answered on Aug 09, 2012

Most auto part store have a parts locator and they should be able to tell you that.

1997 Geo Metro | Answered on Aug 06, 2012

It doesn't matter where the compressor is.

When you get the install kit it will have directions to follow. There are two ports on the ac lines. One is larger than the other to help prevent you from connecting to the wrong side of the system. The ports are covered by black caps.

1997 Geo Metro | Answered on Aug 03, 2012

there should be an adjustment bolt somewhere on the bracket. turn it one way it pulls the AC pulley towards the other pulley put the belt on then turn the adjustment bolt the opposite way and it will push it away and tighten the belt. you only want about an 1/8 inch play in the belt so the tighter the better

1997 Geo Metro | Answered on Jul 16, 2012

Not finding what you are looking for?
1997 Geo Metro Logo

324 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1995 Geo Metro
1995 Geo Metro

215 Questions

1994 Geo Metro
1994 Geo Metro

193 Questions

1993 Geo Metro
1993 Geo Metro

168 Questions

1996 Geo Metro
1996 Geo Metro

168 Questions

1992 Geo Metro
1992 Geo Metro

151 Questions

Top Geo Experts


Level 3 Expert

85206 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Geo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Metro Geo

  • Metro Geo

Most Popular Question

show me drl fuse

  • Cars & Trucks