1991 Peugeot 405 - Answered Questions & Fixed issues


You've covered all the reasons why fan belts shred. I would suggest looking closer, and making sure the bearings are good in all belt driven devices.

Reply back if you have any further questions.

1991 Peugeot 405 | Answered on Jan 09, 2019 | 546 views


Hi,just reading with interest" Ianhende's" problem with his 406, I have the same sort of problem with a 2002 406 hdi (110) i.e hazards going off,plus central locking turning on & off whilst driving. have replaced battery, the mechanic is thinking that it is to do with a faulty door lock, any ideas out there ???? ajc.jlc@tiscali.co.uk

1991 Peugeot 405 | Answered on Oct 30, 2018 | 860 views


My friend is a part time mechanic he gets his solutions from www.reliable-store.com he gets from their every single detailed info, instructions, diagrams,
error codes, troubleshooting, transmission etc. everything on all vehicles, and factory manuals for service, repairs, parts, owner's, operations, maintenance etc.
U can get help from there
there is a girl at chat she can help you

1991 Peugeot 405 | Answered on Mar 20, 2018 | 45 views


Sounds like you have a blockage in your water system or your head gasket has blown. If the radiator is full then check the water to see if it is oily or check the oil to see if it is a grey colour as what you are describing is common when the water is not circulating through the internal radiator in the dashboard that air is pumped through to give you the warm air and the car is overheating quickly means the water is leaking into the engine somewhere. If the oil and water are fine then use a garden hose to flush out the water system heater hose.

1991 Peugeot 405 | Answered on Nov 04, 2017 | 820 views


maybe a fuse or a wire got disconnected from the guage

1991 Peugeot 405 | Answered on May 18, 2017 | 159 views


On this website you find fuse box description for Peugeot 405

http://www.autogenius.info/peugeot-405-1991-and-1992-fuse-box-diagram

1991 Peugeot 405 | Answered on Jul 10, 2016 | 170 views


do both sides flash fast or just one side ? if it's both sides you may wish to purchase a new flasher relay for your car. if it's fast on one side still... check further to see if there is a burnt out bulb including (if it has one the side marker light).

robert

1991 Peugeot 405 | Answered on Dec 02, 2015 | 800 views


i would,nt have thought it would be a good thing to manually shift into first gear whilst going downhill, only use manual shifting from start off ,and overtaking but then the kickdown should be ok for that , not to be used as a brake , how steep is this hill ? i know this isn't what you asked but i dont think theres a problem with it not doing that

1991 Peugeot 405 | Answered on Jul 13, 2015 | 106 views


not sure about this model ,depends on year but removing fuse F! stop immobilisor from working

1991 Peugeot 405 | Answered on Dec 18, 2014 | 290 views


If you need the code check gumtree.com and search peugeot clarion radio code, they email code from your serial number! Quicker and cheaper than main dealer, I have used them!

1991 Peugeot 405 | Answered on Dec 05, 2014 | 143 views


if you got the FOB really wet then the circuit board is ruined, you are going to have to replace it.

1991 Peugeot 405 | Answered on Nov 05, 2014 | 450 views


Normally, Peugeot's fuse boxes is one in engine bay. One is located and situated behind the driver's side lower facia panel. Remove the steering column cover and you would see the main fusebox.

1991 Peugeot 405 | Answered on Jul 04, 2014 | 1,763 views


Buy a Haynes workshop Manual of 607 or 406. They use the same 202 hdi disel engine.

1991 Peugeot 405 | Answered on Jun 15, 2014 | 283 views


check if any fuses are not blown out.
To remove first remove +ve baterry terminal and then remove both the wire at the back of the cigaret lighter and ther will be a nut at the back just unscrew it, if no nut just press towarts outside.

1991 Peugeot 405 | Answered on Apr 04, 2014 | 109 views


There are timing marks on the pulleys. Make sure that you align all of these before attempting to replace the timing belt. If you are unsure of what you are doing, it is best to bring it to a mechanic. You might end up loosing your engine.

1991 Peugeot 405 | Answered on Feb 02, 2014 | 33 views


Top off coolant and re-test.

1991 Peugeot 405 | Answered on Jan 19, 2014 | 34 views


i do not have a diagram for the fuse layout however
looking at your fuse box pull ONE fuse out at a time and check that they are not blown they should have a link in the plastic if there is no link then it is blown most cars have the radio and cigarette lighter linked together and this is normally about 10-15 amps.
there is also a fuse for you heater controls however this normally stops the fan "blower" from operating if your temperature control is electric then the motor that moves the arm to mix cool and hot air flow may be damaged
hope this has helped
ricky

1991 Peugeot 405 | Answered on Dec 10, 2013 | 884 views


First thing to check is to see if you have the correct amount of transmission fluid, which is checked with the engine running, then of course is the possibility that you need a new transmisson, or have your old one rebuilt. You could try to change the transmission filter, but usually by the time your transmission does what you describe, a filter won't help.

1991 Peugeot 405 | Answered on Dec 06, 2013 | 46 views


You are driving too fast.

1991 Peugeot 405 | Answered on Jun 15, 2014 | 218 views

Not finding what you are looking for?

638 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1990 Peugeot 405
1990 Peugeot 405

103 Questions

2005 Peugeot 405
2005 Peugeot 405

788 Questions

1989 Peugeot 405
1989 Peugeot 405

-61 Questions

2006 Peugeot 405
2006 Peugeot 405

155 Questions

Top Peugeot Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Marvin
Marvin

Level 3 Expert

85222 Answers

scj103

Level 2 Expert

104 Answers

Are you a Peugeot Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...