Pontiac Cars & Trucks - Recent Questions, Troubleshooting & Support


Don't change fuses unless blown. Usually, in the G8, the aux power F14 20 amp fuse blows before either the F22 or the F13. I bet that's what is blown in yours--it's usually what blows in mine.

2009 Pontiac G8 | Answered 3 days ago


its probably all gunked shut with dexcool...pull the lower radiator hose instead to drain

Pontiac Cars &... | Answered on Jan 12, 2020


Take help from online websites that have this service like helping in repair some like reliable-store have instant help.. others are a bit slow which I don't prefer... rest is up to u.. U can also get free manuals

Pontiac Cars &... | Answered on Jan 11, 2020


Turn key to on position. Leave on for ten minutes then try it

Pontiac Cars &... | Answered on Jan 07, 2020


Without having the vehicle an doing some testing we'd only be guessing . Your best bet would be have a qualified repair shop look at it . You replaced the starter but the battery light stays on ? That's because the starter has nothing to do with the charging system . The battery light is an indication the charging system has a problem . The charging system on your vehicle is controlled by the PCM - engine computer . The first thing to do would have been to hook up a scan tool an check for codes in the PCM & BCM .

Pontiac Cars &... | Answered on Jan 03, 2020


Electric in tank fuel pump is defective or the relay or wiring for the pump is faulty.

1999 Pontiac... | Answered on Jan 03, 2020


Generally weird stuff like this is caused by the gears in the headlights being stripped. You can search for tutorials on opening the motors and flipping the gear. It only uses half the gear so if it's flipped you use the other side.

Since you know you reversed the wires, I'd look into the headlight control module. Probably zapped it.

2000 Pontiac... | Answered on Jan 02, 2020


If you are replacing the entire mirror assembly you have to remove the door panel.

First remove the switch plate by prying upward at the rear of the switch plate and unhook the connectors. Then remove the two armrest screws. The door panel then has to be pryed away from the door to release the clips. They don't give up easily so yo may have to force it a bit. Once the clips are loose pull up on the panel to remove it from the window reveal molding. The mirror is held on with three 10mm nuts. remove those and unhook the wiring from in the door. Install is reverse of removal.

Good Luck

2003 Pontiac... | Answered on Jan 01, 2020

Not finding what you are looking for?
Pontiac Logo

65,140 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Pontiac Experts

Marvin
Marvin

Level 3 Expert

85219 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...