Question about 1993 Chevrolet S-10
The little contact could have bent and is sitting on the ring, you may have to bend it so it only makes contact when you push on the horn pad. things should fit easily if the force it things can get bent out of their original shape and cause issues.
Posted on Apr 25, 2017
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
behind the airbag is the horn switch i dont reccomend checking the the switch unless you know how to disarm the srs systems but i accidently leaned on it once pushed the plate in and when i pushed on it it went off but if i took my hand off it it would go back on otherwise their could just be a simple short
Posted on Feb 22, 2009
Hi. If your airbag has not deployed, you don't have to replace it. The airbag may have to be removed to get at the horn circuit. Try taking it to an independent auto repair place. I'll be willing to bet that they'll give you a better price for the repair. Good luck! ricardok45
Posted on Feb 24, 2009
Are you replacing the signal switch because you are having problems with your turn signals working? If you are don't replace it yet. There's a recall for the 2000 chevy malibus.
Vehicle Make / Model: Model Year(s): CHEVROLET / MALIBU 2000-2001
OLDSMOBILE / ALERO 2000-2001
PONTIAC / GRAND AM 2000-2001
NHTSA CAMPAIGN ID Number: 03V327000 Summary: CERTAIN PASSENGER VEHICLES HAVE HAZARD WARNING SWITCHES THAT MAY EXPERIENCE SOLDER JOINT CRACKING CAUSED BY RAPID TEMPERATURE TRANSITIONS AND THE SOLDERING PROCESS. IF SOLDER JOINT CRACKING OCCURS AND RESULTS IN AN OPEN CIRCUIT, THE TURN SIGNALS/HAZARD LAMPS BECOME INTERMITTENT OR INOPERATIVE. Consequence: WHEN THE TURN SIGNALS ARE INOPERATIVE, THE DRIVER CANNOT USE THEM TO SIGNAL INTENT TO TURN THAT COULD RESULT IN A CRASH. Remedy: DEALERS WILL REPLACE THE HAZARD WARNING SWITCH. OWNER NOTIFICATION BEGAN ON FEBRUARY 5, 2004. OWNERS SHOULD CONTACT CHEVROLET AT 1-800-630-2438, PONTIAC AT 1-800-620-7668, OR OLDSMOBILE AT 1-800-630-6537. Notes: GM RECALL NO. 03043. CUSTOMERS CAN ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION¿S AUTO SAFETY HOTLINE AT 1-888-DASH-2-DOT (1-888-327-4236).
Also If you want to check out other recalls go to http://www-odi.nhtsa.dot.gov/cars/problems/recalls/recallsearch.cfm
Posted on May 13, 2009
SOURCE: 2000 Tahoe Horn broken
You can remove the horn relay and use a Ohm meter and check the resistance between the horn relay connector terminal No. 86 (Black Wire) and ground. If the ohms are less then 5 ohms replace the horn relay. There are a lot more tests but as Polarcycle states you can do what he suggested other then I believe you have two horns in this vehicle.
Posted on Aug 03, 2009
Tips for a great answer:
Jul 31, 2017 | 1992 Chevrolet S-10
Sep 12, 2010 | Ford Thunderbird Cars & Trucks
Sep 05, 2010 | Chevrolet Chevy Cars & Trucks
Jan 28, 2010 | Chevrolet 1500 Cars & Trucks
Sep 19, 2009 | 1987 Chevrolet Blazer
Aug 02, 2009 | 1992 Chevrolet S-10
Jul 20, 2009 | 1998 Chevrolet Lumina
May 09, 2009 | 2000 Chevrolet Malibu
Jan 28, 2009 | 2000 Chevrolet Venture
Nov 25, 2008 | Chevrolet C1500 Cars & Trucks
50 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: