Question about 2006 Ford Freestar

1 Answer

Who knows where I can get a guide to replace the Heater Core on my 2006 Ford Freestar?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 4,388 Answers

I have the shop manual & wiring book from Ford for your car. If interested, let me know. $25 plus postage.

this is a big job, time consuming. Is it leaking coolant?

Removal and Installation
NOTE: If a heater core leak is suspected, the heater core must be leak tested before it is removed from the vehicle.

  1. Drain the cooling system. For additional information, refer to Section 303-03.
  1. Position the front seats fully rearward.
  1. Depower the supplemental restraint system. For additional information, refer to Section 501-20B.
  1. Remove the wiper motor and pivot assembly. For additional information, refer to Section 501-16.
  1. Remove the LH and RH windshield side garnish mouldings. For additional information, refer to Section 501-05.
  1. Remove the LH and RH A-pillar lower trim panels. For additional information, refer to Section 501-05.
  1. Disconnect the heater hoses from the heater core.
  1. Lower the glove compartment.
  1. Remove the 3 steering column opening panel lower bolts.
    • To install, tighten to 8 Nm (71 lb-in).
  1. Remove the steering column opening panel cover.
  1. Remove the steering column opening panel upper bolts.
    • To install, tighten to 8 Nm (71 lb-in).
  1. Remove the steering column opening panel reinforcement.
  1. Remove the 4 storage console pin-type retainers.
  1. Remove the storage console.
  1. Remove the rear seat floor duct adapter.
  1. Remove the upper instrument panel finish panel.
  1. Remove the LH lower instrument panel bolt.
    • To install, tighten to 12 Nm (9 lb-ft).
  1. Remove the LH upper instrument panel bolt.
    • To install, tighten to 12 Nm (9 lb-ft).
  1. Remove the 4 upper instrument panel bolts.
  1. Remove the upper instrument panel cowl bolt.
    • To install, tighten to 5 Nm (44 lb-in).
  1. Remove the 4 instrument panel center support brace bolts.
    • To install, tighten to 12 Nm (9 lb-ft).
  1. Remove the LH instrument panel support bracket bolt.
    • To install, tighten to 12 Nm (9 lb-ft).
  1. Loosen the RH instrument panel bolts one half of the bolt length, but do not completely remove the bolts.
    • To install, tighten to 12 Nm (9 lb-ft).
  1. Working through the glove compartment opening, remove the RH instrument panel support bracket bolt.
    Who knows where I can get a guide to replace the H - a0083958.jpg
  1. Position the LH side of the instrument panel slightly away from the dash panel.
  1. Remove the heater core and evaporator core housing support brace nut.
  1. Remove the heater core and evaporator core housing support brace bolt.
  1. Remove the heater core and evaporator core housing support brace.
  1. Remove the 4 floor duct screws.
  1. Remove the floor duct.
  1. Remove the 7 heater core cover screws.
  1. Detach the wire harness from the heater core cover.
  1. Remove the heater core cover.
  1. Remove the heater core.
  1. To install, reverse the removal procedure.
  1. Fill the engine cooling system. For additional information, refer to Section 303-03.

Posted on Oct 31, 2011

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How long the job takes to change an heater core for an 08 Pontiac torrent


2006 Pontiac Torrent Need to Replace Heater Core, Heater ...

https://www.2carpros.com/.../pontiac-torrent-2006-pontiac-torrent-need-t...
Nov 5, 2010 - Heater problem 2006 Pontiac Torrent 6 cyl All Wheel Drive ... BIG jobinstrument panel must be removed AC discharged, SIR deactivated ect. ... Why did youtake in? ... How to replace a heater core in a 1998 ford f150 4x4 5 4.

Heater Core Replacement Cost for Pontiac Torrent ...

repairpal.com > Estimator > Pontiac > Torrent
How much does it cost to replace a heater core on a Pontiac Torrent? Make sure it's a fair ... heater core. Cheap heater cores tend to leak and not last very long.

Pontiac Torrent Repair: Problems, Cost and Maintenance

repairpal.com > Cars > Pontiac
A guide to problems, costs, maintenance and repair for your Pontiac Torrent. Problems. Verified by ... after changing bcm radio is locked and wont play. 2006 Pontiac ... 2008 Pontiac Torrent. 0 answers ... Heater Core Replacement. Pontiac ...

2006 Pontiac Torrent Heater core - Questions - Fixya


Jan 19, 2016 | Pontiac Cars & Trucks

1 Answer

How to know if heater core leaking on freestar 2004


If you have an odor of coolant inside the vehicle, or the windshield fogs up when the defroster in turned on, or the carpet on the passenger floor is wet and doesn't dry, you probably have a heater core leaking.

Sep 22, 2011 | 2004 Ford Freestar

1 Answer

My heater core needs replacing how do i i have a new 1 i dont know how to install it help me


Installing a heater core on a ford freestar is a tough job as is on most cars you need to remove the dash before you can get to the heater core ...This is a large job and if you dont have any experience at removing a dash then I would take to a garage ...ARE you sure the heater core is bad is it leaking or just have no heat ?? If no heat could be a thermostat , a heater control valve , low on antifreeze .....Hope this helps

Nov 20, 2009 | 2004 Ford Freestar

1 Answer

I need 2006 ford freestar fuse box schematics. Drivers window not working.


Owner Guide 1st Printing (.pdf). go to (owners guides and owners manuals/ford,lincoln and mercury owners). once pdf opens up then go to roadside emergencies,fuses and relays then scroll down to fuse diagrams. hope that helps.

Nov 01, 2009 | 2006 Ford Freestar

1 Answer

Replacing a heater core in a 2004 ford freestar


you must remove the entire dash assembly, this job requires a factory service manual or u will likely never get it apart without breaking it.

Sep 16, 2009 | 2004 Ford Freestar

Not finding what you are looking for?
2006 Ford Freestar Logo

436 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

Marvin
Marvin

Level 3 Expert

85223 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

gerry bissi

Level 3 Expert

4388 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...