Question about 1994 Chevrolet Camaro

3 Answers

Replace fuel pump in 94 camaro without dropping the rearend?

I have a 1994 camaro z28 and the fuel pump went out. in the manual it says to drop the rear end and driveshaft . can i cut a hole in my body and if so can you give me any clue where?...

Posted by on

  • 1 more comment 
  • styckz666 Oct 12, 2008

    why dont i want to cut a hole?... i would have to cut a hole big enogh to get out the old and put the new in... and also would i use a roto zip to cut the metal?

  • Anonymous Mar 18, 2014

    red light on rev counter of 1994 chev camaro z28

  • Clint Sadler
    Clint Sadler Mar 27, 2014

    right behind the rear seat

×

Ad

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

I wouldnt cut a hole cuz the tank is about an inch away from your body . It is possible cuz my buddy did it to his 91 TBI really slow camaro . He made a door and had to cut his metal fuel lines and use hose clamps and rubber fuel lines to put it back together . It wont work on a 4th gen unless you cut a huge hole . Its a total barefoot redneck way to do it . Ive changed 4 in my 3rd gen (autozone pumps) back in the day and 3 in my 4th gen . Its not a easy task but you will spend as much time trying to cut a hole and fish your high pressure lines out of the way and fishing the whole sending unit out of your fabricated hole not to mention its a unibody and doesnt need holes in it or GM woulda put a door in from the factory . Drop your muffler all your suspension and the two 18mm bolts from your rear control arms and drop the rearend . Everything is out of the way then its 2 15mm bolts to loosen your tank straps and pop off your fuel lines which are plastic on a 4th gen and metal on a 3rd , and your there . Pop your retainer ring change the pickup screen (sock) when you change the pump then reverse the process . It usually takes 4 or 5 hours of hardcore wrenching but it gets easy after you change a few .The exhaust was the hardest to get off for me working off jackstands with a basic tool set . Lol cut it all off and replace it with a flowmaster cat back , its way easier and you will love the sound especially with headers . Its your car but im sure that most everyone who knows how to wrench , especially f bodys like myself will agree with me . Ive had both my cars tore apart and my 96 TA is gettting a 500 horse lt1 built for it as we speak . Its sat for 3 years so ill have to change my pump again no doubt . Oh buy a good bran name pump like an original Ac Delco or a good aftermarket one from summitt

Posted on Apr 01, 2009

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    New Friend:

    An expert that has 1 follower.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 74 Answers

Yes you can. it is near the center, a little to the left, start with a drill and drill a little hole so you can make sure your near it. but i dont suggest cutting it out.

Posted on Oct 10, 2008

  • harrypreisse Mar 13, 2011

    thankyou for tip. I'll make a hole on my 95 chevy camaro to replace fuel pump. Dropping the rear end seems like to much work for me.

×

Ad
  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I cut a 8x6 hole and made a stainless steel door with hinges and a gasket it looks nice

Posted on Dec 30, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1994 camaro z28 electrical system dead


A couple of things can be the cause. You could have an issue with your battery connection, or your ignition switch is dead. Ignition switch issues tend to kill all the power to the car. They can go without warning. It's located on the driver's side on the steering column.

Oct 14, 2017 | 1994 Chevrolet Camaro

1 Answer

Without cuttin a hole whats thw easiest way to change the fuel pump?


Hello: Drop (remove) the gas tank. If you cut a hole be careful......

Aug 21, 2011 | 1994 Chevrolet Camaro

1 Answer

Where is the fuel pump relay on a 02 camaro?


It's located on top of the gas tank.
The only way to get to the fuel pump and it's relay is either by dropping the entire rear axle and fuel cell. The more common approach is to cut a square hole in rear deck lid (right behind the rear-seats).

Jan 26, 2011 | 1997 Chevrolet Camaro

1 Answer

My 99 z28 was stolen. My whole rear end of the body was wrecked. I need another body. I have looked everywhere. Where can I find an affordable body style, with T-tops for a 99 z28 camaro?


Contact just about any salvage yard they are linked via network and can find the nearest rear clip for you. You probably won't be able to get a complete body due to title issues from them. next thing is another car dump this one.

Nov 14, 2010 | 1999 Chevrolet Camaro

1 Answer

How much is it to get a 1992 camaro fuel pump fixed


Likely more than a normal car,, The f body camaro and firebirds had to remove driveshafts and their protector brace and drop the rear axle assy out of the way to remove the fuel tanks.. I'm guessing 2-3 hours more than a normal car..

Jan 27, 2010 | 1992 Chevrolet Camaro

2 Answers

I have a 1987 Camaro Iroc Z28 5.0 engine. I'ts


Fuel pump is located in the fuel tank. A shop can do a fuel pressure pretty easy. You could do it to, you just have to spend 50 to buy a tester, or spend 20 to have a shop do it.

Aug 16, 2009 | 1987 Chevrolet Camaro

1 Answer

Runs when it wants


could be map sensor or mass air flow sensor.

Feb 17, 2009 | 1994 Chevrolet Camaro

1 Answer

Hose on front of water pump. Heater hose?


If the hose is long enough, cut a short section [say, inch or two] from the bad end and reinstall the hose and clamp. The rest of the hose is probably OK.

Nov 17, 2008 | 1994 Chevrolet Camaro

Not finding what you are looking for?
1994 Chevrolet Camaro Logo

8,362 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

Marvin
Marvin

Level 3 Expert

85223 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...