Question about 1997 Ford Falcon
Not for free:
- austech.info/26116-ford-ef-el-service-manual (its page 2 post 39, is still active; I might add, i think you need to be a registered Austech member to view the link for those looking for it).
Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.
Thank you for using FixYa, have a nice day.
Posted on Feb 29, 2012
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: Replacing front wheel bearings
It isn't a particularly hard job but there are a few techniques that you need to know.
I wouldn't recommend you do it yourself but I would recommend you do it under supervision of someone who knows their stuff.
Retensioning the bearings correctly is extremely important.
Posted on Jun 27, 2009
Most older cars have a mechanical fuel pump mounted to the side of the engine. Usually turns from the Cam or Crankshaft. i would check under the Valve Cover area. should be a small pump that is mechanically driven by the engine. probably half the size of your fist. Trace the fuel line from the carb to it. most oder cars have this set-up. I hope this helps you out. Never worked on a Ford Falcon. My 74 dodge B100 had that as well as my 78 Lemans. Good Luck!
Posted on Jun 04, 2009
EF & EL are 1,5,3,6,2,4
EF has a coil pack under the inlet manifold the EL has a distributor
EF uses a waste spark system so 2 plugs are fired at the same time eg 1 & 6 - 2 & 5 - 3 & 4
Posted on Oct 04, 2008
i have a 96 xh ford falcon 4.0 ute.I am rebuilding the engine and delated the pic i had of the timing set up . I am after a pic or a site that i can see where the timing marks should be. I know that the crank of cause is tdc.(key is on top) cam marker is at 3 o'clock (90 degrees from top). Where does the dizzy gear timing mark point to?
Posted on Oct 12, 2009
Tips for a great answer:
Nov 05, 2016 | Ford Cars & Trucks
Jun 09, 2016 | Cars & Trucks
Mar 11, 2016 | Cars & Trucks
Jan 25, 2015 | Ford Cars & Trucks
Jul 18, 2014 | 1997 Ford Falcon
Aug 25, 2012 | Cars & Trucks
Nov 07, 2009 | Ford Fairmont Cars & Trucks
Jun 04, 2009 | Ford F Cars & Trucks
2,970 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: