Question about Cars & Trucks
Car has been running great. Came out from work and it wouldn't start. Appears light may have been left on. Tried to jump and it cranks but won't turn over. Took out battery and it tested bad. Replaced with new one and it cranks but will not start. Any thoughts on what could be wrong?
I need year--make--model? If it cranks good but won't start, check the basics. Have a helper crank it while you check for spark at the plugs, gasoline engine. If spark everywhere use a gage and check proper fuel pressure and fuel injector pulse. Any applicable trouble codes?
Sometimes if battery voltage is lost, it may effect your security system, where applicable?
Posted on Feb 09, 2018
Have someone check the fuel pump relay ,what type of car is it
Posted on Feb 09, 2018
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
this is most likely the battery protection relay, this is part of the lighting control module (LCM/GEM), your dealer can test test it but the issue may have been related to the cold, this module controls almost everything except the engine and trans.
Posted on Dec 17, 2008
Right off i would say its ignition switch. If you got a test light ground it to the neg. post of battery and have someone turn the key to start position while you hold test light on small post on starter if it does not light test light than its ignition switch thats bad. If it lights you got defective starter. My guess its the starter switch. It should be under dash on steering colume.
Posted on Feb 07, 2009
hi,before replacing fuel distributor,you have to perform a fuel pressure test to sure that f,distributor is defect,you can check upper and lower chamber of your distributor to determine if defect,air flow sensor,baffle plate or electrohydraulic controlling element should check also,ty
Posted on Mar 28, 2009
Ive got a Jetta 2 CSI and had the same trouble. I then discovered that my coldstart packed up, wich you cant even get at the agents anymore. So If you are in the Benoni area I can fix it for you for 'n reasonable price, and you won't have that trouble any longer. Mine is still starting by just touching the key. 0829484343
Posted on Jun 18, 2009
Tips for a great answer:
Jul 04, 2017 | 2007 Honda Accord Sedan
First thing to check is turn
your key on and look for a amber light that say check engine. Make sure that
light come on and go out after about 3 to 15 sec with the key in on position. If
you don't have the light on the most likely your car computer do not get power
recheck the fuses and fusible link.
If you have the light on then
listen to the fuel pump running when you turn the car on, it should run for
about 3 sec. and turn off. If you don't hear the sound of the fuel pump then it
would be your fuel pump or relay. obd2 scanner tool
May 09, 2012 | Cars & Trucks
Jan 20, 2018 | Cars & Trucks
Jun 16, 2011 | 2005 Mercury Mariner
May 31, 2011 | 2006 Pontiac G6
May 27, 2011 | Honda Civic Cars & Trucks
May 24, 2011 | 2001 Volkswagen Beetle
May 23, 2011 | Toyota Corolla Cars & Trucks
36 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: