Question about Peugeot 206

Open Question

Howdo you remove 206 dipstick tube - 206 Peugeot Cars & Trucks

Posted by Anonymous on

Ad

2 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

darin brown

  • 393 Answers

SOURCE: Dipstick tube

there is a bolt on/near the exhaust manifold, then you should be able to wiggle&pull out.

Posted on Nov 26, 2008

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My oil dipstick broke off. Can you tell me the easiest way to retrieve the stick to replace with new


Many dipstick holders are bolted to the engine...removing this bolt and the dipstick tube should also retrieve the dipstick...you may need a new tube, as well as dipstick...Hope this helps.

Mar 26, 2015 | 2003 Nissan Sentra

Tip

Broken dipstick removal on 1.8l Nissan Sentra.


There have been issues with dipstick handles breaking off and dipstick stuck in tube. Here is a simple way to remove that broken dipstick. On the valve cover there is a hose that leads to the intake tube. Remove this hose and with a blow nozzle blow compressed air into the valve cover. The broken dipstick will shoot out of the tube. Simply install the new dipstick into the tube.

on Feb 13, 2010 | Nissan Sentra Cars & Trucks

1 Answer

How can I remove the dipstick tube?


the bottom of the dipstick tube is just pushed into the block, you might have to use some brake cleaner to loosen it up if its being stuborn

Feb 22, 2013 | 2004 Nissan Sentra 1.8

1 Answer

Dipstick brokeoff inside dipstick tube


It's only 2 bolts to detach dipstick tube from block and if it doesn't pull the broken piece out when u remove tube u should see the piece sticking out of block to pull it out by hand!!!

Jan 08, 2013 | 2002 Nissan Sentra

1 Answer

Snaped dipstick and can not insert a new 1


I gather from reading this that your dipstick has broken off and is still partway stuck in the tube and you cannot get it out or put a new one in? IF that is the problem, you can unhook the tube from the spot that it connects to the engine and slide the old stick out, put the tube back on and put the new dipstick back on it. There may be a bracket holding the tube in place that you have to loosen or remove. To remove the tube just pull it straight out.

Jan 06, 2013 | Cars & Trucks

1 Answer

How do you do it--alterenator replace 2006 dodge van


Hi there, you did not specify the type of engine you use so here are possible guides for varying enginge types:

2.4L Engine
To Remove:

1. Disconnect the negative battery cable.
2. Disconnect the intake air temperature sensor and remove the air cleaner assembly.
3. Remove the EVAP purge solenoid and move it out of the way.
4. Disconnect the wiring from the alternator.
5. Remove the accessory drive belt from the alternator.
6. Remove the alternator.

To Install:

1. Install the alternator.
2. Install the accessory drive belt
3. Connect the wiring to the alternator.
4. Install the EVAP purge solenoid in the bracket.
5. Install the air cleaner and duct, then connect the intake air temperature sensor.
6. Connect the negative battery cable.

3.3L & 3.8L Engines
To Remove:

1. Disconnect the negative battery cable.
2. Disconnect the wiring from the alternator.
3. Raise and safely support the vehicle.
4. Remove the right front tire and lower splash shield.
5. Remove accessory drive belt.
6. Remove the lower engine oil dipstick tube bolt, then remove the wiring harness from the dipstick tube.
7. Remove the 3 mounting bolts.
8. Lower the vehicle.
9. Remove engine oil dipstick tube.
10. Roll and carefully remove the alternator from vehicle.

To Install:

1. Place the alternator into position on the engine.
2. Install upper mounting bolts to hold the alternator in place.
3. Lubricate the o-ring with engine oil and install the dipstick tube.
4. Install the upper dipstick tube bolt.
5. Connect the wiring to the alternator.
6. Raise and safely support the vehicle.
7. Install the alternator lower mounting bolt and tighten.
8. Install the lower oil dip stick tube bolt.
9. Install the accessory drive belt.
10. Install the right front splash shield and tire.
11. Lower vehicle.
12. Install the wiring harness at the dipstick tube
13. Connect the negative battery cable.

Hope these help.

Jan 28, 2011 | 2006 Dodge Grand Caravan

1 Answer

How to remove altenator on 2006 dodge grand caravan


Removal & Installation 2.4L Engine To Remove:
  1. Disconnect the negative battery cable.
  2. Disconnect the intake air temperature sensor and remove the air cleaner assembly.
  3. Remove the EVAP purge solenoid and move it out of the way.
  4. Disconnect the wiring from the alternator.
  5. Remove the accessory drive belt from the alternator.
  6. Remove the alternator.
To Install:
  1. Install the alternator.
  2. Install the accessory drive belt
  3. Connect the wiring to the alternator.
  4. Install the EVAP purge solenoid in the bracket.
  5. Install the air cleaner and duct, then connect the intake air temperature sensor.
  6. Connect the negative battery cable.
3.3L & 3.8L Engines To Remove:
  1. Disconnect the negative battery cable.
  2. Disconnect the wiring from the alternator.
  3. Raise and safely support the vehicle.
  4. Remove the right front tire and lower splash shield.
  5. Remove accessory drive belt.
  6. Remove the lower engine oil dipstick tube bolt, then remove the wiring harness from the dipstick tube.
  7. Remove the 3 mounting bolts.
  8. Lower the vehicle.
  9. Remove engine oil dipstick tube.
  10. Roll and carefully remove the alternator from vehicle.
To Install:
  1. Place the alternator into position on the engine.
  2. Install upper mounting bolts to hold the alternator in place.
  3. Lubricate the o-ring with engine oil and install the dipstick tube.
  4. Install the upper dipstick tube bolt.
  5. Connect the wiring to the alternator.
  6. Raise and safely support the vehicle.
  7. Install the alternator lower mounting bolt and tighten.
  8. Install the lower oil dip stick tube bolt.
  9. Install the accessory drive belt.
  10. Install the right front splash shield and tire.
  11. Lower vehicle.
  12. Install the wiring harness at the dipstick tube
  13. Connect the negative battery cable.
prev.gif next.gif

Jan 16, 2011 | 2006 Dodge Grand Caravan

1 Answer

I do not have the owner's manual and need to know how to fill the ATF resorvoir.


ATF (Automatic Transmission Fluid) is added to the transmission through the dipstick tube. First make sure that you are checking the fluid level correctly:

Start the engine and let the engine warm up for a minute or two.
Then pull the dipstick from the ATF dipstick tube and wipe it clean; reinsert it back into the tube, paying close attention that you are inserting it all the way down until the tube is sealed again.
Then remove the dipstick and check the level of fluid on the dipstick, with attention to the fluid level markings on the dipstick.
Do this several different times to make sure you are getting accurate readings, as some transmissions make it difficult to REMOVE fluid, in case of overfilling.
If you DO add any, add just a little at a time, and permit time for the fluid to settle, so you can get accurate readings of the dipstick fluid level.
Constantly recheck to make sure you do not overfill your transmission.

Hope this helps.

Mar 27, 2010 | 1994 Isuzu Trooper

2 Answers

How do I replace the oil dipstick tube?


The dipstick can be pulled out of the block with a pair of vicegrips and the new one driven down into the block. Before trying to pull the dipstick tube out make sure it is not held onto the block with a small bolt.

Jan 20, 2010 | 2002 Chevrolet Tahoe

1 Answer

Transmission fluid


the tube is on the right side of the engine near the back. Remove the dipstick and add fluid with a funnel. When you check the fluid level, do so with the engine running in park. Be sure to buy the appropriate fluid for your make.

Dec 18, 2008 | 2002 Pontiac Bonneville

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

579 people viewed this question

Ask a Question

Usually answered in minutes!

Top Peugeot Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Marvin
Marvin

Level 3 Expert

85206 Answers

scj103

Level 2 Expert

104 Answers

Are you a Peugeot Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...