Question about Peugeot 207
Anti pollution light is displayed on dash along with engine management light.
Posted by Anonymous on
You will first need to get the car plugged into a diagnostic system or an OBD2 scanner to find the problem codes to tell you why the lights came on. Some local mechanics will do it a lot cheaper than a dealership or having to buy a decent scanner to do it yourself. Once the problem is fixed use the same type of system or scanner to clear the codes and lights.
Simply clearing the codes won't work. The lights will just come back on.
The reason for the light could be several different problems from a misfiring spark plug to a head gasket problem, (expensive). Comment with the codes below and I'll try to help you with them.
Posted on Aug 07, 2018
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: peugeot 406 1.9(110HDI) 2003
See if you can get the codes read, your model often has a particulate filter and all that entails but not allways on the 2,0 HDi, it seems too much of a coincidence to not be connected.
Posted on Jan 03, 2010
Testimonial: "I thought that the info was very helpful and prompt in response "
The following is from peugeotdiesel.com bot seems to be valid for all models:
1. Switch the Ignition Off
2. Press and hold the tripmeter (mileage reset) button on the dash
3. Now switch the ignition to the ON position
4. Keep the button pressed for 10 seconds
5. The display will read '0' and the service symbol will extinguish.
Also, can disconnect the battery for a few minutes. This should clear the code. Unless you have fixed the problem that set the code it will come on again.
I hope help you with this (remember rated this help) Good luck.
Posted on Oct 06, 2009
Its located under bonnet,look for plastic housing rear of engine on inner baulkhed
Release 2 locating fixings,and pull out old filter.good luck barry.
Posted on Nov 17, 2009
Hi this could be many things.
Most likely it will be the air mass sensor, the lambda sensor, or the EGR valve, although if the EGR valve has gone you will notice a big loss in power.
You will have to get the car put on a code reader to be sure.
Posted on Feb 08, 2010
Tips for a great answer:
Aug 16, 2018 | Peugeot Cars & Trucks
Mar 12, 2018 | Peugeot 207 Cars & Trucks
Oct 05, 2017 | Peugeot Cars & Trucks
Aug 02, 2016 | Peugeot Cars & Trucks
Sep 13, 2015 | 2007 Peugeot 207 1.4
Dec 16, 2014 | 2009 Peugeot 207 1.4
Nov 29, 2014 | Peugeot Cars & Trucks
Jan 11, 2013 | Cars & Trucks
Mar 16, 2012 | 2007 Peugeot 207 CC
May 01, 2010 | 2005 Peugeot 405
7,294 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: