Question about Peugeot 206

Open Question

Peugeot 206 1.4 hdi code p0382 in limp mode intermitantly

My 2002 peugeot 206 1.4 hdi goes into limp mode intermitantly at 2900rpm and the fault code is p0382 ( glow plug curcuit\ heater b malfunction) can anybody give me a fix for this problem,

Posted by on

Ad

2 Suggested Answers

Anonymous

  • 34 Answers

SOURCE: PEUGEOT 206 HDI STARTING PROBLEM

your ecu monitor.. emissions control unit mod is done! i dont think this is a cheap fix. either wait for warmer weather,, sell the car or find a dealer to fix this diesel puppy...word of advice .. dont buy peugeot in this country .. or any country...joke.!!

Posted on Feb 27, 2010

Ad

Anonymous

  • 138 Answers

SOURCE: Audi A6 3.0 tdi Quattro 2005, glow plug light comes on, limp mode

16619 -Engine boost condition - Limit not reached. Check intake hoses/ connections for leaks. Check Turbo charger waste gate regulating valve/ waste gate working correctly. Must move freely when accelerating, won't achieve full boost if waste gate sticking open. Check Turbo impeller turning freely, oil feed pipe for turbo can get blocked causing impeller to seize. Engine compact, not easy to access these components.

Posted on Jun 06, 2010

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Looking too buy peugeot 807 deisel 2.2 hdi been told it goes in limp mode but it still drives and willeventually get to 70 or 90


When a transmission is put into limp mode by the pcm/tcm, it's for a reason. The limp mode is to limit further damage until the problem can be diagnosed and properly repaired. Keep driving it and it will require a new transmission.

Jan 30, 2017 | Peugeot Cars & Trucks

1 Answer

My Peogeot 206 HDI has a diagnostic error code P14660. The engine turns but it doesn't start


that fault code is too high for a Peugeot 206 with OBD2

i checked all the Peugeot car forum sites for answers
on that code

P14660 no mention
PO4660 no mention
PO1466 no mention

need to start back old school diagnosis

fuel pump ... spark at plugs

this is the world list of all PO obd2 fault codes
http://www.troublecodes.net/pcodes
26328114-dr1l0prezoqh0gobrdoiolxi-5-0.jpg

Oct 26, 2016 | Cars & Trucks

1 Answer

My peugeot 206 model doesn't have revs whats the problem?


could be in limp mode
run the fault codes to see what is reported

May 07, 2016 | 2005 Peugeot 206 1.4

1 Answer

307 peugeot


sensor failed or failing and ecu is in limp mode. you need to have the ecu read to find the fault as it can be one of many sensors cam/ crank, egr etc fault can trigger then the fault is gone but ecu will still be in limp mode. can take upto 30 starts to remove fault code and be out of limp mode.

Jan 16, 2018 | Cars & Trucks

1 Answer

Peugeot207 1600 Diesel HDI goes into limp mode


This make is not sold in the USA so have little or no info on it. Sorry

Jun 06, 2012 | Cars & Trucks

2 Answers

PEUGEOT 206 HDI STARTING PROBLEM


your ecu monitor.. emissions control unit mod is done! i dont think this is a cheap fix. either wait for warmer weather,, sell the car or find a dealer to fix this diesel puppy...word of advice .. dont buy peugeot in this country .. or any country...joke.!!

Feb 26, 2010 | 1989 Peugeot 405

1 Answer

PEUGEOT 206 2.0 HDi Coil light fault...


Hi , there is a relay timer for the glow plugs,keeps the heater plugs on in start mode for about 10 seconds. it should be in a box on the right side when you lift the bonnet, needs replacing, good luck.

Feb 24, 2010 | 2005 Peugeot 405

1 Answer

Cant start my 206 2 liter hdi easy i put new heater plugs in but it is still the same


check the glow plug relay on the bulk head they are known for failing due to water ingress
also you may want to get the crank position sensor checked

Oct 09, 2009 | 2006 Peugeot 604

2 Answers

I have just bought a peugeot 206 Hdi and the coil light dosn't go


glow plug light should just flicker as not needed until -6 stop light stays on when off until started

Apr 04, 2009 | 2005 Peugeot 405

3 Answers

PEUGEOT 307 LX 1.4 HDI 2003, 2 NEW INJECTORS, SAFE MODE 50MPH


I had same problems with my 307 hdi, turned out that the additive which drips into fuel was empty and changed particle filter,problems solved

Jan 31, 2009 | 1987 Peugeot Liberte

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

654 people viewed this question

Ask a Question

Usually answered in minutes!

Top Peugeot Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Marvin
Marvin

Level 3 Expert

85223 Answers

scj103

Level 2 Expert

104 Answers

Are you a Peugeot Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...