Question about Chevrolet Silverado 2500

Open Question

How do I tighten the manual side mirrors on my 1991 Silverado

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 29 Answers

SOURCE: 99 silverado sports mirrors

yes if the bolt patterns are the same, if not, fill in the old holes and make smaller holes for the new bolt pattern.

Posted on Apr 21, 2009

Ad

Anonymous

  • 93 Answers

SOURCE: driver side mirror loose how can i tighten it

Most mirrors have a removable cover just on the inside of the door. If you look closely where the mirror meets the door on the inside should be a snap in place cover or three screw holes with snap in covers that you remove and then use a screwdriver or small socket wrench to tighten the screws or bolts.

Joe

Posted on May 20, 2009

Anonymous

  • 10 Answers

SOURCE: How to tighten side mirror. 1996 dodge ram 1500 manual mirrors

take door pannal off there should be 3 bolts in the inside of the door where mirror sits unless its the reflection peace where you have to just get a new mirror

Posted on Jul 19, 2009

super_guy

  • 1986 Answers

SOURCE: Driver Side Mirror

On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door

Posted on Sep 29, 2009

Anonymous

  • 244 Answers

SOURCE: 1994 chevy silverado driver side mirror is loose

try removing the black cover that wraps out from the door to the mirror just be carefull.....plastic ****.

Posted on Apr 25, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Tighten side mirror


If the mirror housing is loose and nothing has hit it and broken the mounting to the door frame, yes. If it is the glass part that is loose and it is a electric or manual mirror, something has damaged it behind the glass replacing it will fix problem.

Dec 07, 2013 | 2007 Lincoln Mark LT

1 Answer

Replace side mirror glass 2005 silverado 2500


you can not replace just the glass. you need to replace the whole mirror. sorry

Mar 09, 2013 | 2005 Chevrolet Silverado

1 Answer

Right side power mirror on silverado hd 2500 will not move out


are you referring to the power camper mirrors that adjust out for towing? if so you can try and move out manually by pulling on it this may free up the stuck motor if that doesnt work will need to replace mirror

Mar 07, 2011 | 2005 Chevrolet Silverado

1 Answer

2005 Silverado 2500HD Diesel truck: Driver mirror vibrates (motorized extender with turn indicators). Any way to tighten or fix?


on most gm products the mirror is mounted to a plastic base sometimes the base can come loose particularly if you have hit something with the mirror even if the mirror did not break.you can try to press gently on the center of the mirror and it may snap back into place or take it to a local auto glass shop if that is the problem they should be able to help you. If the problem is internal then you will have to remove the mirror very carefully and repair or replace the broken part.

Feb 22, 2011 | 2005 Chevrolet Silverado

1 Answer

1994 chevy silverado driver side mirror is loose


try removing the black cover that wraps out from the door to the mirror just be carefull.....plastic ****.

Apr 25, 2010 | Chevrolet Silverado Cars & Trucks

1 Answer

The glass in the driver side rear view mirror is loose. how do you tighten it up?


The driver and passenger side mirrors have a small rubber plug in the bottom center of the mirror housing. Remove the plug and there is a phillips head screw holding the mirror assembly. Tighten this screw about 1/8 turn and it will keep the mirror from moving around. If you remove the screw you can remove the mirror and drive motors. Use a bit of thread-lock to keep the screw from loosing again. Reinstall the rubber plug.

Jan 30, 2010 | 1991 Toyota Previa

1 Answer

How to tighten side mirror. 1996 dodge ram 1500 manual mirrors


take door pannal off there should be 3 bolts in the inside of the door where mirror sits unless its the reflection peace where you have to just get a new mirror

Jul 18, 2009 | 1996 Dodge Ram 1500 Club Cab

1 Answer

Outside mirrors on my Previa look like they are about to fall out.


on the inside of the door, directly inside where the mirrors are there should be a triangular piece of moulding (plastic). Take a straight screwdriver and gently pry this piece off. Once that is off you will see..probably 3 nuts, 7 or 8mm.... all you have to do then is just tighten them up until they are snug, and replace the piece of moulding that you took off.

May 19, 2009 | 1991 Toyota Previa

1 Answer

99 silverado sports mirrors


yes if the bolt patterns are the same, if not, fill in the old holes and make smaller holes for the new bolt pattern.

Apr 19, 2009 | 1999 Chevrolet Silverado 1500

1 Answer

99 explorer drivers side mirror vibrates


are you trting to tighten the mirror glass or the mirror where it attaches to the body? I don't think glass is removable in 99. Only can try to press on glass to seat if unseated. not too hard.

  1. Remove the front door trim panel; refer to Section 501-05 .
  2. go to car-part.com for a used mirror. Page with * is cheapest seller.
  1. Remove the speaker.
    1. Remove the screws.
    1. Disconnect the electrical connector.
    1. Remove the speaker.
  1. Remove the outside rear view mirror (17682).
    1. Disconnect the power mirror wiring clips.
    1. Remove the outside rear view mirror nuts.
    1. Remove the outside rear view mirror.
      • Feed the power mirror wiring through the opening in the front door (20124).
------------------------------------------------------
f9d70e9.gif
----------------------------
SECTION 501-09: Rear View Mirrors 2001 Explorer/Mountaineer Workshop Manual
REMOVAL AND INSTALLATION Exterior Mirror Glass, 2001 model Removal
NOTE: Exterior mirror glass is serviceable only on vehicles built after July of 2001.
NOTE: Passenger side exterior mirror shown, driver side exterior mirror similar.
All mirrors
  1. Position the glass in the full up position.
  1. Locate the notch at the bottom of the exterior mirror glass.
  1. Release the exterior mirror glass.
    1. Insert a long flat-bladed screwdriver in the notch.
    1. Push the screwdriver into the notch until the glass is released.
Heated mirrors
  1. Position aside the exterior mirror glass.
  1. Disconnect the electrical connectors.
All mirrors
  1. Remove the exterior mirror glass (17K707) passenger side or (17T675) driver side.
Installation
Heated mirrors
  1. Connect the electrical connectors.
All mirrors
  1. Position the exterior mirror glass on the exterior mirror motor.
  1. Place a hand against the back of the exterior mirror housing and a hand flat against the exterior mirror glass. Press the glass in place until fully seated.
4d9527f.gif

Apr 12, 2009 | 1999 Ford Explorer

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

72 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

Marvin
Marvin

Level 3 Expert

85216 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...