Question about 2006 Ford Explorer Sport Trac
What is torque value for wheel nuts on 2007 Explorer Sport Trac?
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Torque Specifications Description Nm lb-ft lb-in Brake caliper bolt 32 24 — Brake disc shield bolt 8 — 71 Fuel tank filler pipe bracket bolt 15 11 — Fuel tank filler pipe hose clamps 3 — 27 Halfshaft nut and washer 275 203 — Lower arm inboard bolt 250 185 — Lower arm outboard bolt 275 203 — Parking brake cable bracket bolt 10 — 89 Shock absorber lower bolt 275 203 — Shock absorber rod nut 65 48 — Shock absorber upper mount nut 30 22 — Stabilizer bar bracket nut 48 35 — Stabilizer bar link nut and grommet 30 22 — Toe link cam adjuster nut 275 203 — Toe link outboard bolt 325 240 — Trailing arm bolt 300 222 — Upper arm outboard bolt 225 166 — Upper arm inboard nut 250 185 — Wheel speed sensor bolt 8 — 71 Wheel knuckle bolt 275 203 —
Posted on Mar 30, 2009
Press and hold the SELECT/RESET
control switch to select SYSTEM
CHECK when “SYSTEM CHECK /
HOLD RESET” is displayed in the
message center. Selecting this
function from the SETUP MENU
causes the message center to cycle through each of the systems being
monitored. For each of the monitored systems, the message center will
indicate either an OK message or a warning message for two seconds.
Pressing the SELECT/RESET control switch cycles the message center
through each of the systems being monitored.
The sequence of the system check report and how it appears in the
message center is as follows:
1. OIL LIFE RESET
2. CHARGING SYSTEM
3. WASHER FLUID
4. DOOR AJAR
5. EXTERIOR LAMP
6. BRAKE SYSTEM
7. PARK BRAKE
8. MILES TO EMPTY
9. FUEL LEVEL LOW (will only display if 50 miles or less to empty)
To reset the oil monitoring system to 100% after each oil change
[approximately 5,000 miles (8,000 km) or 180 days] perform the
1. Enter SYSTEM CHECK to display
“OIL XXX% RESET IF NEW”.
2. Press SELECT/RESET control
switch to display “HOLD RESET IF
3. Press and hold the
SELECT/RESET control switch for
more than 2 seconds. Oil life is set
to 100% and “OIL CHANGE SET TO
100%” is displayed.
Posted on Apr 02, 2009
SOURCE: How do I change a
No tricks but sometimes rust or corrosion will build up causing it to sieze to the hub. Take your spare tire and, I know this will sound silly but, use the spare to swing into the bottom of the tire and break it free. You will not do any damamge to the vehicle. I know this usually works for me. You can use a little WD-40 to spary around the hub to prevent this from happening again.
Posted on Feb 21, 2011
Tips for a great answer:
Mar 09, 2018 | Ford Cars & Trucks
Jan 11, 2016 | 2007 Ford Explorer Sport Trac
Feb 21, 2011 | 2007 Ford Explorer Sport Trac
Feb 25, 2018 | 2007 Ford Explorer Sport Trac
Sep 20, 2010 | 2007 Ford Sport Trac Limited
Sep 18, 2010 | 2001 Ford Explorer Sport Trac
Nov 17, 2009 | 2007 Ford Explorer Sport Trac
Sep 11, 2009 | 2004 Ford Explorer Sport Trac
Aug 05, 2009 | 2007 Ford Explorer Sport Trac
Mar 30, 2009 | 2007 Ford Sport Trac Limited
139 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: