Question about 1995 Honda Accord
Try some heet or iso dryer. They reduce water from gasoline. That is most likely what was in the gas can. Gas cans especially ones with just a small amount in them build up condensation inside.get this stuff and a can of sea foam dump them in your gas tank. Two bottles of the dryer and one can sea foam fill tank all the way full and run it out. Good luck.
Posted on Apr 01, 2017
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
change the filter first. IF the pumpwas bad it wouldnt start at all. It could be going bad but the only way to really test it is to pull your gas tank and at that rate you may as well replace it.
you could have a clogged injector causing the lack of fuel as well. you can try injector cleaner, Lucas is my personal preference I use it at every fill-up. 4-6oz per tank of gas depending on your tank size.
Posted on Oct 15, 2009
Are you sure you have correct timing? its definetly a fule problem, if timing is good then turn your key to the on position and try to listin for the fule pump to prime. While the key is in on position go to fuel rail, there is a valve on fule rail called sharader valve. Get a small screw driver and press valve in to check if car has fule pressure. if pressure is present then it is incorrect timing or possible bad cam sensor.
Posted on Mar 01, 2010
Tips for a great answer:
Sep 30, 2015 | 1995 Honda Accord
Jan 09, 2013 | 1994 Honda Accord
Jan 19, 2011 | 1995 Honda Accord
Dec 26, 2010 | 1998 Honda Accord
Apr 28, 2010 | 1995 Honda Accord
Jan 24, 2018 | 2007 Honda Accord Sedan
Sep 14, 2009 | 1995 GMC Jimmy
Jul 12, 2009 | 1996 Honda Accord
87 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: