Question about 2011 Chrysler Town and Country

1 Answer

2011 chrysler town and country back up camera display not working

Back up camera screen first worked intermittently, now not at all. It still displays the message to check while backing up, but no camera picture

Posted by on

  • 1 more comment 
  • E Anders Jan 28, 2013

    Did you figure this out? I'm having the same problem. The message comes on the screen is black.

  • E Anders Jan 28, 2013

    Did you figure this out? I'm having the same problem. The message comes on but the screen is black.

  • Anonymous Oct 15, 2018

    In regards to getting a new TIPM board. It may not be necessary. Try Verticles Visions first.

    I had a fuel pump relay problem which caused my vehicle to not turn on at all and drain the battery even when the car was off but Verticle Visions.com offered a solution for my van with excellent service. I didn't have to get a new tipm board just bought a piece that I attached which took me (a mother of 3) about 10 minutes. My husband was shocked vertical visions saved us $1000 which would've cost me $1200 to get a new tipm board. Everyone's problem may vary but I called and they were so helpful as I explained my problem and were very patient. Highly recommend them 304-933-9391 Hope this helps someone like it helped my family.

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 2 Answers

I have this problem with the backup camera, the dealership is telling me that the problem is in the TIPM (Totally Integrated Power Module). I am guessing there is a circuit board with a relay that went bad. They are telling me that the part is over $1000. I am going to check it out myself to be sure before fixing this.

Posted on Dec 26, 2013

Ad

5 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Bruce Hathcock

  • 3600 Answers

SOURCE: Steering column 2005 chrysler town and country

You can buy a haynes manual to remove it but most manals won't have that information, why do you want to change it and if you have a camera I can tell you how to remove and replace it if I have a picture of it.

Posted on Jun 22, 2009

kirtec auto

  • 1348 Answers

SOURCE: Describe your 2005 Chrysler Town &

check the bulbs do not have fractured filaments,and check the headlamp relay.check the sockets for corrosion and if all that checks out ok check the connection on the back of the headlight switch and the daytime running light module

Posted on Aug 15, 2009

Anonymous

  • 1 Answer

SOURCE: CHRYSLER town and country mini van turn signal/flasher

I have a 2005 Chrysler T&C. The turn signal would not work at all or activate incorrect side. The switch is easy to remove as described by dukecityman.

Once the switch is of, it has four screws holding it together.I took this apart to find that there was a circuit-board which was contaminated with dirt. wiped it of, put it back together, working fine.

If you take it apart use caution. there are parts on the "top" which will fall out. ( they go right back in) The circuit-board is on the "bottom" half. You really only need to take this part off. (less moving parts)

Your going to replace it anyway, whats the harm?

Posted on Jan 28, 2010

niarfe

  • 2 Answers

SOURCE: 1997 town & country stalls intermittently. ...

I had the same problem in the past with the lights. I repaired it by removing the the dash panel and re-soldering the pins where the harness plugs into. I am currently having the stall issue. in my research it seems to be the crank shaft sensor. I was told that the crank shaft sensor and the cam sensor work together and have decided to change them both along with the gas filter.

Posted on Jul 01, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Honda crv reversing camera not working how can i check it


Do you see anything on the screen? Does the screen switch to display the camera and just comes up blank? Is there any message?
It's possibly a broken wire. You would have to access the wiring to check for voltage at the camera.
Make sure your backup lights come on when in reverse. Some systems often use the voltage to the backup lights to activate the camera. If the switch is messed up and the lights don't come on, it might be the problem.

May 09, 2017 | Honda Cars & Trucks

1 Answer

I have a 2004 chevy Silverado 2500 HD and I got a odometer error message in my instrument cluster. Is this from the instrument recall from way back? Front left window switch works intermittently also.


Disconnecting the battery isn't going to change anything . You have a hard fault . The IPC calculates the mileage based on the vehicle speed signal circuit from the powertrain control module (PCM). The odometer will display 'error' if an internal IPC memory failure is detected. IPC- instrument panel cluster ! Is the odometer inoperative ?


Is the

Sep 01, 2015 | Cars & Trucks

1 Answer

HOW DO I FIX OR CHECK OUT THE PROBLEM OF MY BACK UP CAMERA NOT WORKING?


Try and clean the camera lense. Make sure there isn't anything blocking the camera.

Mar 02, 2015 | 2012 Chrysler Town and Country Touring...

1 Answer

2006 trailblazer factory installed DVD has sound but no screen. The screen intermittently comes on, it stays on once it works but if we turn the vehicle off, we get the intermittent behavior. Has an


the factory dvd decks are designed to disable the dash display when the car is running, to negate distracted driving. the factory wires the rear seat dvd displays only to work when car is running, and the dash to work only when the car is either acc, or, possibly, in park.

if the dash is intermittent, and, especially, if the dash display has some dvd video while running(or, more dangerously, when in drive) then a previous owner likely tried to bypass this safety feature by crossing wires under the dash, and did a poor job.



otherwise, lcd screens can become intermittent, in regards to powering on or off, if the backlighting regulating circuits start to fail. this would be an issue with the deck itself, and is merely due to old age (nearly 8 years)

. the hallmark of this problem would be if you were to hold a flashlight to the screen, and see a faint display,- simply lacking the florescent back-lighting.

Dec 28, 2014 | 2006 Chevrolet Trailblazer Ext

2 Answers

Backup camera does not show any display. the warning light comes on but but the screen is black.


The camera at the rear end is not feeding video back to your screen or the screen is dead.

Nov 24, 2013 | 2007 GMC Yukon XL Denali

1 Answer

How do i get the title of the station and the title of the song back running across my radio screen? the message button doen't fix the problem...


How about a display button usual on most new after market radios anyway the display button controls what you see on the screen

Dec 18, 2011 | 2006 Chevrolet Cobalt

1 Answer

06 nissan murano camera. The screen shows the


NO, the back-up camera is a 6 volt camera on the Murano.

Feb 21, 2010 | 2006 Nissan Murano

Not finding what you are looking for?
2011 Chrysler Town and Country Logo

6,065 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

Marvin
Marvin

Level 3 Expert

85216 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...