Question about 1999 Chevrolet Suburban

1 Answer

1999 chevy suburban horn, does not work, Fuse is good and relay is good. Where is the ground located?

Troubleshoot horn!

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    New Friend:

    An expert that has 1 follower.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 23 Answers

The ground to the horns is the metel bracket on the horn itself that bolt to the frame of the car , also check the contacts for rust or corrosion , also worse case it might be the clock sping behind the steering wheel try pressing the horn while turning the wheel hope this helps good luck

Posted on Mar 20, 2013

Ad

2 Suggested Answers

Anonymous

  • 65 Answers

SOURCE: 1999 Chevy Lumina horn is not working. Horn is

Simply have it replaced, horns on domestics usally stop working as mine did on my 93 lumina, it stopped working and I had it replace and it worked fine after that.

Posted on Aug 21, 2009

Ad

Tommy Cude

  • 299 Answers

SOURCE: 1999 Chevy Cavalier Horn Relay Location

should be in underhood junktion block.

Posted on Jun 17, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Make my horn honk


I looked at info for a Silverado 1500. Use a test light to check for voltage at horn fuse in under hood fuse box. According to this diagram, the horn relay has to be energized. Have a helper hit the horn switch when you check voltage at horn fuse. If hot, have to check wiring circuit to horn. In the diagram, dark green wire is voltage and black wire is ground. You could actually use jumper wires from battery for voltage and ground to horn, for testing.

horn-n30smozawzciiupvf1pu1dlc-5-0.jpg

Nov 13, 2017 | Cars & Trucks

1 Answer

HOW DO I CHANGE THE HORN FUSE ON MY 1999 BUICK LESABRE


Jim, Remove passenger side kick panel to access the fuse box where horn fuse is located #3 fuse in your manual, box fairly high up under dash. Horn relay under hood/engine compartment fire wall.
Check the attached links,instruction and guides and a manual for your buick, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Interior Fuse Box Location 1990 1999 Buick LeSabre 1992 Buick LeSabre...
Troubleshooting broken Horn or fuse or relay GM Buick LeSabre 1994 1995...
http://pdfstream.manualsonline.com/8/81776d98-998a-493c-aac6-a5895c51d47b.pdf
Horn doesnt work Ricks Free Auto Repair Advice

Jun 27, 2016 | 1999 Buick LeSabre

2 Answers

Is there a fuse for the horn on a 2000 Chevy Malibu?


fuse for horn on a 2001 malibu is located under the hood.
there is a fuse (15 amp) in slot #43
and there is a relay in slot #21
if you remove the relay and put it back in wrong the horn will not work.

fuse-horn-2000-chevy-malibu-i42l1bq1qrxu2fudnsefqnkk-4-0.jpg

Sep 26, 2014 | 2000 Chevrolet Malibu

2 Answers

Toyota Camry 1999 model horn does not work


new horn or relay gone most likely but make sure it is grounded good or wont work either hook battery booster cable from negative battery terminal to horn bracket if it works then clean mounting area under horn ground is bad

Dec 11, 2012 | 1998 Toyota Camry

1 Answer

I have a 1995 Chevy S 10 and the horn does not work. I think my problem is under the dash. Are there any switches,relays, or breakers I need to be looking\r\nfor? I have traced from horn to fuse panel and...


The horn relay is in the fuse/relay box under the hood. so the fuse is HOT on both sides? you should hear the horn relay click when pressing on the horn switch. there may be other relays in that fuse box to swap with and see if the horns work, if the relay clicks, its "usually" good, but the contacts may be bad. if the relay clicks, check for power at the horn. DARK GREEN wire, if it has power , then check the black wire, thats the ground. If it has power and ground, but does not work, the horn is bad.

Sep 14, 2011 | 1995 Chevrolet S-10 CA Edition

5 Answers

Horn not working on 1999 z28 camaro / what could


Well, it could be a fuse. Check the associated fuse, if it is ok then proceed to checking for power at the horn (it should have 12v). If the horn has power then replace the horn. If it does not then seek proffesional certified help due to the fact that the problem is going to be in the steering column or horn pad, and that will require dealing with the airbag system (which is NOT recommended) unless qualified.

Nov 24, 2009 | 1999 Chevrolet Camaro

2 Answers

My horn doesn't work on my 1999 Acura TL 3.2. Is


Absolutely - You'll find it in the main fuse-box - probably located in one of the kickpanels (near your feet) or dashboard cover, or maybe even in the glovebox - There will be a fuse that feeds a horn relay - the ground side is fed from the horn pad, and the output side fed to the horn itself (engine compartment). The fuse for the horn is located in a fusebox with about another 25 fuses; and should be hot at all times, both sides.

Aug 21, 2009 | 1997 Acura TL Series

2 Answers

1999 Chevy Lumina horn is not working. Horn is


Simply have it replaced, horns on domestics usally stop working as mine did on my 93 lumina, it stopped working and I had it replace and it worked fine after that.

Aug 21, 2009 | 1997 Chevrolet S-10 Pickup

1 Answer

Fuel pump shut off location on a 1999 chevy suburban???


there is no fuel pump shutoff on this truck, if the fuse and relay are good there is a 99.9% chance your fuel pump is gone bad. they usually start to give off a louder sound from the tank and then they quit shortly after.

Apr 12, 2009 | 1999 Chevrolet Suburban

1 Answer

1986 Chevy Caprice Classic Horn not working


Diagram should be on the inside of the fuse box or relay cluster lid/cover. If Test light has 1 wire and a sharp tip? Yes, but only if you push the horn button too ;-)

My guess is that the horn lost its ground, but you can check this with the light. The horn only beeps when both GROUND and Pos 12v are present. The horn button gives the relay 12v to close, and the relay gives the horn 12v to operate. The ground is always connected.

Connect tester clipwire to 12v source (battery, headlight (has to be on) and touch its tip to metal of car. Does it light? Good. the tester is working and the 12v is a good source.

Touch one of the 2 horn connection or wires (poke it thru the plastic - why tip is sharp). Does it light? Touch the other, does it?

If both light, (1 will be brighter) we can assume the horn coil is good and it is getting a good ground and I was wrong (it happens... but not often). The side that is BRIGHTER is the ground wire side.

Now have someone mash the horn button. Do you hear a tiny click? That is the horn relay. If not, look for the horn relay fuse and replace it. If you DID hear the click, the relay coil is good and is trying to switch 12v to drive the horn.

Now is time to locate and replace the horn fuse or the relay may have bad contacts. Look at the other relay part numbers in the cluster and see if there is a match for the horn one. Swap it out and try the horn.

Hope this all helps. To 'test' the horn, touch the dim side again anf listen for a scratching sound. That is the 12v going thru the tiny bulb in the tester (a resistance) and trying to drive the horn.

Good Luck!

Mar 27, 2009 | 1986 Chevrolet Caprice

Not finding what you are looking for?
Cars & Trucks Logo

788 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

Marvin
Marvin

Level 3 Expert

85223 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...