Question about 2004 Chrysler PT Cruiser
Where is the crankshaft position sensor located on a 2004 Chrysler PT Cruiser and how do I remove it? I've heard to try and locate it from the bottom of the car as well as from the top. I don't know. I've already replaced the camshaft sensor and the battery. The car died @ a red light and wouldn't start afterwards. It tries to turn over but won't start completely. There is no spark to fire it up..plugs/wires are good, ignition coil is working. Last option from what I've been told is the crankshaft position sensor but I cannot locate it. Thank you.
You may sneak it out with small fingers with out pulling out the starter.
If starter removal is required,Just unhook the battery cables,Remove the 2 bolts holding the starter on.
Please rate this a fixya
Posted on Feb 08, 2009
EXHAUST CAM WILL HAVE A NOCH ALIN AT 3 OCLOCK THE INTAKE ALIN AT 9 OCLOCK BOTH MARK ON THE CAM SPORKET MARK MEET EACH ANOTHER, THE CRANKSHAFT GEAR WILL HAVE A NOCH THERE WILL BE A MARK AT ABOUT 12 OCLOCK ALIN CRANK GEAR TO THAT MARK.
Posted on Nov 04, 2009
GET A 3 SPOKE PULLEY EXTRACTOR AND SCREW IN THE BOLT BUT IN THE CRANKSHAFT HOLE PUT A MUCH SMALLER SCEW SO YOU WOUNT MESS THE INSIDE UP
Posted on May 26, 2010
Tips for a great answer:
Nov 09, 2017 | Chrysler PT Cruiser Cars & Trucks
Nov 24, 2015 | Cars & Trucks
Aug 22, 2011 | 2005 Chrysler PT Cruiser
Mar 24, 2011 | 2004 Chrysler PT Cruiser
May 14, 2010 | 2005 Chrysler PT Cruiser
May 02, 2010 | 2003 Chrysler PT Cruiser
Mar 01, 2010 | 2004 Chrysler PT Cruiser
Sep 26, 2009 | 2004 Chrysler PT Cruiser
Jul 14, 2009 | 2004 Chrysler PT Cruiser
May 23, 2009 | 2004 Chrysler PT Cruiser
18,919 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: