Question about 1999 Chevrolet Tracker

1 Answer

Put new starter on still wont crank - 1999 Chevrolet Tracker

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Chevrolet Expert
  • 284 Answers

You may have a bad ignition switch, a blown fuse somewhere or a bad relay. Do you have power going to the starter. That is the first thing I look for. Does the starter click at all? If not, it's a relay or the ignition switch.

Posted on Feb 19, 2013

Ad

2 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
alicantecoli

Colin Stickland

  • 22485 Answers

SOURCE: put on new starter..day later the service engine

this is not a related issue ,but iam not sure what you mean "wont stay cranked" sorry but i am only a common cockney from the east end of london GB and a we never learnt foreign languages at school

Posted on Jan 09, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Starter went bad lots of sparks got new one put all back right and now cranks but wont fire. have power to coil pack Brand new also the crank and cam sensor


yes, tacho also runs off that sensor.
I trust you disconnected the battery before you pulled the starter?
If not you may have fried a module or 2 and possibly even the computer.

Apr 16, 2017 | 2002 Chrysler PT Cruiser

1 Answer

New Battery/starter and still wont crank.


car wont crank or car wont start? I would say your battery cables are bad,, acid gets in from battery and erodes internal cable parts... need a Meter to check it out.. put the meter on battery while someone tries to start it, if the voltage drops from 13.5 to 10 then it is trying to turn over, I always have the new starters tester before I leave a store, they are remanufactured in Malaysa and they use old parts in most of them..

May 06, 2015 | 2001 Pontiac Grand Prix

1 Answer

Starter wont crank and fuse blew and put new fuse and keep blew out what cause fuse blew


starter is probably stuck take starter out and see if you can rotate the shaft .if not replace starter.

Sep 09, 2014 | Cars & Trucks

1 Answer

Cutlass ciera wont start


Does the starter spin the motor at normal cranking speed? If there seems too much friction, try turning the engine over by hand to check if the engine turns freely. Put a socket and wrench on the center crankshaft pulley bolt and turn clockwise. If you cannot turn the crankshaft with a wrench easily, then the starter can't either. Turn the crank all the way around to check for something preventing cranking.
Is the battery still enough power to crank at normal speed? If it's already too low, recharge it, and try again.

Jan 09, 2014 | 1990 Oldsmobile Cutlass Ciera

1 Answer

Starter draging


Either you have a voltage drop to the starter, OR the starter needs to be shimmed as it might be to tight against the Ring Gear when engaging.

Dec 23, 2013 | 1991 Chevrolet S-10 Blazer

1 Answer

Car wont crank


"Turn over" and "crank" are the same thing. Does the starter engage and the engine turn over? If not then you may have a bad wire on the starter, which is a common problem. If it does turn over but won't start then you either have no spark and/or no fuel and you need to have a technician look it over.

Mar 01, 2013 | 2003 Ford Crown Victoria

1 Answer

Put a new starter on 2005 impala go to start car now it wont crank over its a new starter battery is new windows wind down radio works just wont crank


first i would recheck all conections and make sure all on right even on the starter senoid / and on most cars thier is a starter relay and fuse wich should be in the fuse panel box under the hood should have some very large maxi fuses and smaller ones starter fuse should be a maxi fuse which is the larger ones if u have the owners manual for this car it will help locate this fuse quicker good luck

Jan 02, 2012 | Cars & Trucks

2 Answers

1999 ford contour that wont crank


You mean wont CRANK or CRANKS but WONT RUN???? 4 cyl or V6 auto or manual trans????????? The 8th VIN digit would be most helpful as there are 4 different engines for that car. Its really cheaper to check items before you replace them. The starter should have a smaller BLACK wire that should have power on it when trying to crank the car. You say it wont crank, then check the neutral switch on the trans. Try putting it in neutral to start it. If it has a manual trans, the clutch switch on the pedal may be bad. There is a starter relay in the fuse box under the hood that powers the starter, does it click if you turn the key to start? if it does then the relay is at least trying to work, but doenst mean the contacts inside are good, If it does not click, then the neutral switch may be bad.Check the BLACK/YELLOW wire at the trans switch, if it has power on it, the switch may be bad, ground that (Black/Yellow)wire and see if it cranks. I dont know if there are any other relays in the fuse box that you can swap for the starter relay for test purposes.

Dec 14, 2009 | 1999 Ford Contour

1 Answer

Put a new starter in my sons 86 camaro. still wont start, starter wont even try to turn over. Not sure on the wiring since no starter was there when he got it, but there are lights so i think i have it...


First thing is to get a multimeter. Make sure that the main wire going to the starter is hot. should have 12v all the time. Then the smaller wire on the solenoid should have 12v when you are cranking the engine. if its not then you found your problem and go from there.
Thank you,
Lee

Nov 05, 2009 | 1986 Chevrolet Camaro

2 Answers

Wont crank


ON STARTER MOTOR YOU HAVE NORMALLY BLACK/YELLOW SIGNAL WIRE, THIS WIRE SEND VOLTAGE TO S/MTR TO ENGAGE CRANKING.. YOU CAN TRY PUTTING FEED TO THIS WIRE TO SEE IF STARTER TURNS OVER??

Sep 14, 2008 | 1998 Isuzu Rodeo

Not finding what you are looking for?
1999 Chevrolet Tracker Logo

232 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

Marvin
Marvin

Level 3 Expert

85222 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...