Question about Cars & Trucks
Need help setting the alarm
Anytime you lock the door with the key fob or press the drivers door lock the alarm is on. if someone opens the door without the key the alarm will sound. test it by locking the door with the remote with the window down then after a min open door with the inside door handle by reaching in through window
Posted on Mar 13, 2013
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
very common issue with the vigor, it`s the power door actuator or something...there are 2 ways to fix it:
- the harder way (unless you`re half-decent at DIY car stuff, which I`m not), all you really are doing is cleaning the contacts..a detailed guide is here
- OR the easy way is to just trick your car into thinking the hood is open so the alarm will never arm itself. Taken from another post:
You can effectively permanently disable the alarm (who actually bothers to respond when they hear a car alarm anyways?) by opening up the hood and finding the little switch that detects whether the hood is closed. Just bend this so that the alarm system always thinks the hood is open and the alarm system will never arm even if you lock the doors.
Posted on Feb 24, 2009
Check for brake fluids and make sure all the brake fluid container is closed tightly. Also, you make have to bleed the brakes.
Posted on Mar 21, 2009
The only place to get this code is from the dealership. They will enter the code as it maybe different for each car. This happens when the battery has been changed without the backup power supply. As you may have guessed this is to keep would be thieves from reselling your radio.
Posted on May 31, 2009
SOURCE: 1994 acura vigor
The front brake rotors are press fitted to the front wheel bearings and are removed from the car with a special tool (puller) or can be seperated by removing the whole assembly and placing it in a press to seperate them. You may damage the bearing if not done right.
Posted on Aug 04, 2009
Tips for a great answer:
Aug 19, 2016 | 1992 Acura Vigor
Jun 08, 2014 | 1993 Acura Vigor
Aug 27, 2011 | 1992 Acura Vigor
Feb 23, 2010 | 1994 Acura Vigor
Feb 14, 2010 | 1994 Acura Vigor
Jun 24, 2009 | 1993 Acura Vigor
May 11, 2009 | 1992 Acura Vigor
Feb 21, 2009 | 1992 Acura Vigor
Dec 26, 2008 | 1993 Acura Vigor
156 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: