Question about 1990 Ford Bronco II
My flashers work, and my lights, i have no turn signal though, i got a new flasher and the problem still persist, soooo what can i do to fix this i really need to get this working and i dont want to put it in the shop for something stupid
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
If I understand you right based on your post/description, the signal lights would still turn on even if any or both of the flasher relays are removed. Should this be the case, then the signal lights are not getting the power from the flasher relays but from the brake light circuit.
Perhaps your concern is not with any of the flasher, but simply missing or loose ground more particularly with the rear lights. Perhaps you could try determining which of the wires for the brake lights and signal lights (as they come out of the light assembly) would be ground . A test and even possibly a temporary workaround is to hard wire a second ground connection from the determined ground wire of the lights and attach it to any conveniently located bolt or screw to the body. it may be to your advantage to do this on all the rear lights assembly.
Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.
Good luck and kind regards. Thank you for using FixYa.
Posted on Aug 05, 2008
SOURCE: 96 ford tarus turn signal
The turn signals and the emergency flasher are controled by a single electronic flasher unit. It looks like an electronic relay and is located on the far left underside of the dash. It is on a mounting bracket and has a three wire connector. If you do not hear this clicking when you use the turn signals or the emergency flasher it may be bad. Just remove the connector and remove the one screw holding the flasher to the bracket. Be sure the replacement is identical to the old one and compare them before installing the new one.
You may want to also check the turn signal bulbs also. Other causes would be bad signal and flasher switches, bad bulb connectors, and opens or shorts in the wiring.
Posted on Nov 20, 2008
Usually the flasher relays are located either under the dash or out under the hood in a small black box along with some other fuses. You can try swapping the flasher relays with other relays (for example: fuel pump relay, headlight relay, etc...) just as long as they look the same. If your flashers start working then the relay is your problem and you can go to a local auto parts store and pick up a new one for about $10.
Posted on Jan 31, 2009
Tips for a great answer:
Mar 16, 2016 | Ford Cars & Trucks
Apr 09, 2013 | 2006 Chevrolet Express Cargo
Jun 27, 2011 | 1989 Plymouth Acclaim
Jan 05, 2011 | Mercury Cougar Cars & Trucks
Oct 31, 2010 | 1990 Buick LeSabre
Apr 15, 2010 | 2004 GMC Yukon
Jun 26, 2009 | 1990 Buick LeSabre
Jan 19, 2009 | 2003 Hyundai Tiburon
100 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: