Question about 1996 Chevrolet Monte Carlo

1 Answer

1996 monte carlo fault codes po300, 441, 705,

1996 monte carlo 3.4 litre engine; fault codes PO300, 441, 705, 1106, 1133, 1441, 1662, 1672, 1870.

Recently had car scanned due to engine service light coming on and the above fault codes were displayed.

Can someone please expand on what problems are related to the above fault codes?

Posted by on

  • 3 more comments 
  • terry_anthon Mar 24, 2009

    Thank you very much.

  • Anonymous Mar 18, 2014

    scan codes alot same thing

  • Anonymous Mar 18, 2014

    intermitant po300 codes

  • Anonymous Mar 18, 2014

    Car won't start all of a sudden and giving the above fault codes

  • Anonymous Mar 20, 2014

    My blinkers and dash lights don't work on my 1996 monte carlo

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Chevrolet Master
  • 85,206 Answers

THESE ARE FROM THE GM CODE DIFINITION MANUAL, U NEED TO TAKE THIS TO THE DELAER, U HAVE SOME SERIOUS PROBLEMS TO GIVE THIS MANY CODES.

P0300 - Engine Random Misfire Detected
P0441 - Evaporative Emission Control System Incorrect Purge Flow
P0705 - Trans Range Switch Circuit
P1106 - Manifold Absolute Pressure (MAP) Sensor Circuit Intermittent High Voltage
P1133 - Heated Oxygen Sensor (HO2S) Insufficient Switching Bank 1 Sensor 1
P1441 - Evaporative Emission (EVAP) System Flow During Non-Purge
P1662 - Cruise Lamp Control Circuit
P1672 - Low Engine Oil Level Lamp Control Circuit
P1870 - Transmission Component Slipping

Posted on Mar 24, 2009

  • Marvin
    Marvin Mar 24, 2009

    Having used this site for a long time as an expert u will be better off to use the Live Chat pay option for the info u need, there is just way to many problems here for a free forum expert to answer.

×

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1985 Monte Carlo is shakeing bad


Have you run basic tests on this car like fault code tests and other engine mechanical tests like compression tesing?

Apr 21, 2013 | 1985 Chevrolet Monte Carlo

1 Answer

Flashing check engine light on 1997 Monte Carlo


If the CHECK ENGINE light come on, the PCM (computer car) have stored a fault code there; I suggest scanned this and note what fault code is there. Sometimes Autozone or AutoShop make this reader with OBD tools for free.

Keep in touch.

Sep 30, 2012 | 1997 Chevrolet Monte Carlo

1 Answer

Code P1870 for a 1996 Chevrolet Monte Carlo Z34 3.4 litre


Very common Transmission code - solution # 1 check to be sure Fluid is full . If not trans code sent plus will turn on check engine light or service engine soon . # 2 be sure condition of fluid is Good / Not worn out . Fluid must be Red / Reddish in color Cold and When hot- warm still have red / even lighter than when cold .# 3 if a higher than 50,000 mile car used in heavy rush hour traffic during hot weather then change fluid to give it fresh oil / Trans will fight heat better and save you a $$ 2000 repair bill . # 4 most important of all you can save a Trans by adding Lucas Trans treatment it is $ 20 some places but well worth $$ to extend life of vehicle if one in need of saving $$ .This can even be added to existing fluid if color is still reddish .

Jul 06, 2012 | 1996 Chevrolet Monte Carlo

1 Answer

Check engine light is on all the time in my 2002 chevy monte carlo ss, with 3.8 litre engine,on heavy acceleration, the car delays and almost stalls, otherwise it runs ok.


Hi, there are several faults that can cause your symptoms. Please get a scan of your OBD2 port and send us the trouble code for repair advice. If you live in the US, you can get a free scan at your local parts chain.

Apr 29, 2011 | Chevrolet Monte Carlo Cars & Trucks

1 Answer

White smoke from exhaust in 1996 monte carlo


Head gasket failure or a crack in the cylinder head allowing engine coolant to enter the combudtion chamber, then out of the exhaust.

Jul 23, 2010 | 1996 Chevrolet Monte Carlo

1 Answer

How to disconnect check engine light? 1996 Monte Carlo.


it is safer to fix the problem extract the code and i will help you get it off the correct way you can go to your local autozone and they will hook up a scaner to your car and give you the code for free

Jan 15, 2010 | 1996 Chevrolet Monte Carlo

1 Answer

I need to know ho to remove the starter on a 97 malibu 3.1 litre engine


Discunnect the battery, disconnet the wires from the starter, remove the bolts holding it into place. If there are any shims, make a note of where they go.

Oct 17, 2009 | 1996 Chevrolet Monte Carlo

1 Answer

What engines were available in 1996 monte carlos


3.1 3.4 and 3.8 liter engines were available that model year.

Jul 03, 2009 | 1996 Chevrolet Monte Carlo

1 Answer

'96 Chevy Monte Carlo- codes P0441 and P1655


it will be the evap solenoid that will be the problem,not sure where it is in that car, sorry

May 17, 2009 | 1996 Chevrolet Monte Carlo

Not finding what you are looking for?
1996 Chevrolet Monte Carlo Logo

1,151 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

Marvin
Marvin

Level 3 Expert

85206 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...