Question about 1995 Oldsmobile Aurora
My Aurora will not start. It just doesnt do anything at all. My son said it was the ignition relay. I have no way of testing it.Another thing, why is there a key underneath the dash?????
The key under the dash may be bypassing the security system. And that trick may not be working anymore.
You would need to check the starter to see if you have power from the key switch in the start position. The neutral safety switch may have failed, or the security system may be preventing the engine from cranking.
Posted on Jun 20, 2013
Testimonial: "OK, I believe someone before tried to bypass the security system because there were 2 wires soldered to the chip in the key. A friend took those wires loose (he didnt know what he was doing). If I solder those back onto the key do I solder one wire on both sides of the key or one on each side?????"
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: 99 olds aurora pass key problem
There is most likely a problem with the tiny sensor in the ignition lock cylinder, it is not reading the key chip and locks u out, the problem is u can't just replace the lock cylinder u need a dealer only re-programm of the pass key system since the control module will not recognize the new lock code, catch 22 if u ask me. Do u have more than one key for the car? do both do this?
Posted on Jan 16, 2009
try another key. if this doesnt work the wire in the tumbler assembly most likely broke and you will need it replaced. ( Ignition Switch)
Posted on Jul 18, 2009
Measure for the ignition voltage at the fuse panel. If you get this voltage right away, and the lights "pop on" later, then most likely a relay in the fuse panel. If the voltage appears at the same time as the lights, then it looks more like the ignition switch itself.
Posted on Oct 10, 2009
You can jump across the celonoid on the starter. If the engine turns over then your problem is either the celonoid or the starter switch.
Posted on Sep 28, 2008
Check your manual if you have it. I believe you need to have the key in the ignition in the ON position for about 10 minutes to reset the security system.
Posted on Jul 10, 2010
Tips for a great answer:
Oct 14, 2015 | Hyundai Motor 2004 Accent
Feb 06, 2013 | Cars & Trucks
Jun 21, 2011 | Ford Escape Cars & Trucks
May 08, 2011 | 1997 Oldsmobile Aurora
Feb 26, 2011 | 2002 Oldsmobile Aurora
Jan 17, 2011 | 2001 Oldsmobile Aurora
Jan 25, 2010 | 1992 Mercury Topaz
Jul 18, 2009 | 1999 Oldsmobile Aurora
Jan 10, 2009 | 1999 Oldsmobile Aurora
132 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: